User manual BELKIN F5F314-T

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BELKIN F5F314-T. We hope that this BELKIN F5F314-T user guide will be useful to you.


BELKIN F5F314-T : Download the complete user guide (86 Ko)

Manual abstract: user guide BELKIN F5F314-T

Detailed instructions for use are in the User's Guide.

[. . . ] P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 1 Multi-Network Cable Tester User Manual P73237 F4F314 F4F314-T P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 2 P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 1 A. Plug one end of the cable into the modular jack on the master unit marked with "v" and the other end into the receiving modular jack on either the master unit or the remote terminator (for F4F314-T only). [. . . ] If the cable is properly grounded/shielded, the "G" LEDs on both lines should light up, otherwise the cable is not grounded/shielded. B. Plug both ends of the cable into the female BNC connectors on the two RJ45/BNC adapter cables, thus changing the coax cable to a RJ45/RJ45 cable. Plug one end of the cable with the RJ45 connector into the modular jack on the master unit marked with "v" and the other end to the receiving modular jack either on the master unit or the remote terminator (for F4F314-T only). As soon as the power is turned on, select the scanning mode to "MANUAL" and then press the "TEST" button twice to see the first and second pair of LEDs which indicates the continuity of the cable tested. It is recommended to use "MANUAL" mode for coax cable since coax cable has only two conductors. Refer to section "E" for further information. 1 P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 2 C. Plug the first end of the cable into the modular jack on the master unit marked with "v" (plug the RJ45/BNC adapter on first for the coax cable testing), then plug the second end of the cable at the remote location into the modular jack on the remote terminator. Then repeat the instructions from section "A-2", except compare the LEDs on the remote terminator to the LEDs on the master unit. If the remote end of the cable is connected to a faceplate or patch panel, you will need to use the included RJ45/RJ45 or RJ45/BNC adapters to connect the cable to the remote terminator. D. Miswire: 12 345678G Pin 3 and Pin 6 are crossed 2 P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 3 E. [. . . ] 1, 2 & 3) 5 P73237_F5F314_-T_US_man. qxd 2/9/01 3:24 PM Page 6 belkin. com Belkin Components 501 West Walnut Street Compton · CA · 90220 · USA Tel: 310. 898. 1100 Fax: 310. 898. 1111 Belkin Components, Ltd. Unit 13 · Gatelodge Close · Round Spinney Northampton · Northants · NN3 8RX · UK Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B. V. Diamantlaan 8 · 2132 WV Hoofddorp · The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 ©1999 Belkin Components. All Trade Names are Registered Trademarks of Respective Manufacturers Listed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BELKIN F5F314-T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BELKIN F5F314-T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.