User manual BELKIN F1DP108G

[. . . ] OmniView® SMB KVM-over-IP Switch Belkin Tech Support US: 800-223-5546 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B. V. [. . . ] 5. At a client computer, open Internet Explorer (version 6. 0 or above) and type the Switchs IP address (https:// IP address). When the Login screen appears, type in your user name and password, and click . By default, the user name is "admin" and the password is "SMBremote" (both are case-sensitive). If it is your first time connecting, you will be prompted to install the Belkin certificate and the Microsoft ActiveX control. You must have administrator privileges on your client computer to install the ActiveX control. The screen of the currently selected server on the Switch will appear. The quick-access toolbar will also appear on the right side of the screen. If the target server is currently being accessed by another user, a dialog box will appear, giving you the option to "Take Over", "View Only", or "Cancel" (see Fig. A user only has this option when the current session is run by another user, but not by an administrator. The dialog box will not appear for a "view only" user. 1 2 3 4 section 5 6 7 8 9 10 Fig. 10 Server-Access Dialog Box 43 Using the Switch from a Remote Console Full-Screen Mode You can work on the target server in full-screen mode, just as if you were connected to the server locally. To work in full-screen mode: 1. 4. Ensure that the client computer has the same screen resolution as the target server. The Internet Explorer window will disappear, leaving the Internet Explorer menu bar at the top. Right-click the Internet Explorer menu bar and check "Auto-Hide". The Internet Explorer menu bar will disappear and you will be in full-screen mode (see Fig. To exit full-screen mode, press "F11", or move your cursor to the top of the window to display the Internet Explorer toolbar and click the "Restore" button. Fig. 11 Example of Full-Screen Mode 44 Using the Switch from a Remote Console Using the Quick-Access Toolbar The quick-access toolbar provides an easy method for changing settings and switching servers (see Fig. 12 Quick-Access Toolbar Icon Function Minimize or maximize the toolbar 4 section 5 6 Disconnect the remote session 7 8 9 10 Configure the mouse and change settings Configure the keyboard and change settings Adjust the video settings Adjust the bandwidth settings Select which server to access Hide or display the toolbar; open additional features Moving or Hiding the Quick-Access Toolbar The quick-access toolbar can be dragged and placed anywhere on the browser's screen. To minimize or maximize the toolbar, click . Disconnecting the Remote Session To disconnect the session, click you disconnect. You may close the browser after 45 Using the Switch from a Remote Console Mouse Configuration and Settings Mouse-Pointer Alignment When working remotely at the client computer, two mouse pointers will appear: one for the client computer and one for the target server. The client computer's mouse pointer will appear on top of the target server's. If they are not synchronized, follow the instructions below. To align mouse pointers: 1. [. . . ] Secondary KVM Switch: Any KVM switch that is daisy-chained to the primary KVM switch and is set to BANK address 01­15 (and has no console connected). Shorthand for the suite of rules defining the format devices use to communicate over the Internet. Target Server: The server currently being accessed and controlled by the user from a local or remote console. 76 Information FCC Statement Declaration of Conformity with FCC Rules for Electromagnetic Compatibility We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F1DP108G, F1DP116G, to which this declaration relates: Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1 2 3 4 5 6 7 8 9 section CE Declaration of Conformity We, Belkin Corporation, declare under our sole responsibility that the products F1DP108G, and F1DP116G, to which this declaration relates, are in conformity with Emissions Standard EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2, and EN61000-3-3. [. . . ]