User manual BELKIN F1DP104A

[. . . ] Manage your servers using one PS/2 console and CAT5 cabling Manage your servers using one PS/2 console and CAT5 cabling Contrôlez vos serveurs à l'aide d'une console PS/2 et d'un câblage CAT5 Steuerung Ihrer Server über eine PS/2Konsole mit CAT5-Verkabelung Servers beheren met slechts één PS/2console en CAT5-kabels Gestione sus servidores mediante una consola PS/2 y cableado CAT5 IPer gestire i server utilizzando una console PS/2 ed i cavi CAT5 All trade names are registered trademarks of respective manufacturers listed. Congratulations on your purchase of this Belkin OmniView SMB CAT5 KVM Switch. Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at an affordable price. The OmniView SMB CAT5 KVM Switch is the only SMB KVM switch that provides easy and dependable multiplatform server control. [. . . ] The time interval allotted for each server can be defined or adjusted through the OSD menu (see the "Scan Time" section). when the SMB CAT5 KVM Switch is in AutoScan mode , it is also in View-Only mode. This means that input from the console (keyboard and mouse) will not be transmitted to the server in focus. You can also activate AutoScan on your keyboard by pressing "Scroll Lock", "Scroll Lock", space bar, "F4". To disable AutoScan, press any button on the front panel or any key on the keyboard. If the user is using the mouse or keyboard when the SMB CAT5 KVM Switch is switching between ports, data flow may become interrupted and could result in erratic mouse movement and/or wrong-character input when using the keyboard. The On-Screen Display allows you to switch servers, assign names to your servers, enable and disable the AutoScan feature, set the desired scan time interval for AutoScan, enable the password security feature, and program hot keys. The superimposed menu screen is generated by the SMB CAT5 KVM Switch, and does not affect the function of your server, operating system, or software function. If you have only one SMB CAT5 KVM Switch in your configuration, the OSD menu will display "BANK 00". a " " symbol indicates that the connected server is powered up. If the OSD menu does not display a " " symbol for a server that is connected and powered up, you will need to reset the SMB CAT5 KVM Switch to re-detect the server. This is done by simultaneously pressing the "BANK +" and "BANK ­" buttons on the front panel. ( ) Navigate to different servers in the same BANK Select next or previous BANK Highlight server name for editing Switch servers Open the "Function/Help" page Exit the On-Screen Display To switch servers using the main OSD menu, use the arrow keys on your keyboard to navigate to the desired server and press the "ENTER" key. A " " symbol indicates which server is currently being accessed on your console. To select a different BANK, press the "Page Up" or "Page Down" key to select the next BANK or the previous BANK. To change the name of a server, use the arrow keys to navigate to the desired server, press the "Insert" key, type in the new name, and press "ENTER" to save the entry. The "Function/Help" page allows you to set the time intervals for the AutoScan feature and OSD display time, enable the password security feature, and program hot keys. (F4) ( ) (Insert) (Esc) (F10) (Space) Initiate AutoScan Navigate to the next field Highlight field for editing Return to the main OSD menu Program Monitor-DDC2 settings to all Server Interface Modules Change options for selected field This specifies whether the AutoScan feature is enabled or not. To enable or disable the AutoScan feature, use the arrow keys to navigate to the "Scan" field and press the space bar. This specifies the amount of time the SMB CAT5 KVM Switch remains on a server before switching to the next server while in AutoScan mode. You may set the scan time interval to anywhere between 5 and 99 seconds. To change the scan time, use the arrow keys to navigate to the Scan Time field, type the desired time interval (in seconds). [. . . ] If you are using a PC keyboard on a Mac system, a few of the option keys on your PC keyboard may be reversed. The following definitions are used throughout this User Manual: AutoScan: A mode of operation where the KVM switch scans from one port to another, on an ongoing basis, as configured by the user. Control: When discussing switching between ports, control means that the console is capable of sending input to the server. control requires that the console also has focus on the port , and is viewing it. [. . . ]