User manual BELKIN F1DL102P

[. . . ] Microphone/Audio Support Built-in microphone, speaker jacks, and cables support your small- and home-office multimedia add-ons. This feature reduces clutter by eliminating the need to unplug and re-plug speakers and mics when you switch between computers. Hot Keys Hot keys allow you to select ports using designated key commands. Control multiple computers using a simple hot key sequence on your keyboard. [. . . ] The Switch emulates a mouse and keyboard on each port and will allow your computer to boot normally. Note that it will take 1-2 seconds for the video to display after switching. A re-synchronization of the mouse and keyboard signal also takes place. This is normal operation and ensures that proper synchronization is established. You can conveniently change ports on the Switch through a keyboard command sequence using the "SCROLL LOCK" key and up and down arrow keys. To send commands to the Switch, press the "SCROLL LOCK" key twice within two seconds. Then you can press the up or down arrow keys to switch between ports. Switch to next active port, up arrow 9 Switch to previous active port, down arrow USING YOUR SWITCH You can switch directly to any port by entering the Switch port number you wish to use. For example, if you press "SCROLL LOCK", "SCROLL LOCK", "2", the computer on port 2 will be selected. + AutoScan Mode + Switch to Port 2--(2) In AutoScan mode, the Switch remains on one port for eight seconds before switching to the next. To enable AutoScan mode, press "SCROLL LOCK", "SCROLL LOCK", "S". Note: There is no mouse or keyboard control in this mode by design, in order to prevent errors. If it were enabled, the user could move the mouse or use the keyboard while the KVM Switch is switching to the next port. This could interrupt communication between the computer and Switch that might cause erratic mouse movement, or result in errant display of characters when using the keyboard. To disable AutoScan mode, press the space bar. 10 FAQs Q: What operating system does the Switch support?A: The Switch will support any operating system that runs on a PS/2 platform. It will also work with SunTM and Mac® operating systems using the appropriate adapters (Belkin OmniViewTM Sun Adapter F1D082, OmniView Mac Adapter F1D080). Operating systems include, but are not limited to, DOS, Windows 95, 98, 2000, Me, NT, XP, Linux, and Novell NetWare 4. x/5. x. A: Yes, the Switch will function with Microsoft, Logitech, Kensington, as well as with all Belkin mice. Please contact Belkin Technical Support for any compatibility questions you may have. A: The user can choose computers using specially designated hot keys from the keyboard. A: When using PS/2 connections, the Switch can be up to eight feet away from your computer. If your computer needs to be more than eight feet from the KVM Switch, you can use the Belkin CAT5 Extender (part number F1D084) to extend the operation distance of your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using standard CAT5 UTP cable. 11 FAQs Q: What is the maximum video resolution the Switch supports?A: The advanced video circuit in the Switch supports a maximum resolution of 2048x1536@65Hz. [. . . ] This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. [. . . ]