User manual BELKIN BLUETOOTH HEADSET

[. . . ] Talk Button: Switches the headset on/off, answers/ends a call, pairs the headset with a device, and is used for voice dialing. Before using the headset for the first time, you have to charge the headset battery for approximate 2 hours to get a full charge. A fully charged battery provides up to 7 hours of talk time and over 1 week of standby time. [. . . ] After creating a paired link, you do not need to repeat the pairing process and the headset automatically links to the mobile phone when both devices are switched on. Paring must be performed every time you want to use the headset with a different Bluetooth mobile phone or other Bluetooth wireless technology enabled devices. To initiate pairing between the headset and a Bluetooth mobile phone in close proximity: 1. Press the Talk button to switch on the headset, and keep the Talk button pressed for 7 seconds until the LED indicator alternates between blue and red. If time runs out after 60 seconds and the pairing fails, you will have to repeat the steps above. on completing pairing , the phone's screen will notify you that the pairing was successful. The LED indicator continuously flashes blue, and the headset goes into standby mode. Before using the headset, make sure that (1) the headset is switched on and connected to a paired. Bluetooth mobile phone; (2) the headset is within 10 meters of the phone; and (3) the phone's Bluetooth feature is on (see your phone's user's guide). When an incoming call comes, the headset rings and the LED indicator flashes blue at a 3-second interval. Please note that if the mobile phone rings first, wait until you hear a ring tone from the headset, and then press the Talk button to answer the call. To end a call, press the Talk button once on the headset or press the phone's END key. When a call comes and you do not want to answer it, you can press the Talk button for 2 seconds to reject the call. You can make a call through: To use voice activation, the mobile phone must support voice dialing. [. . . ] belkin reserves the right to replace discounted product with an equivalent generation product. This warranty does not apply if the product has been damaged by accident, abuse, misuse or misapplication; if the product has been modified or dismantled without the written permission of Belkin;or if any Belkin serial number has been removed or defaced. The warranty and remedies set forth above are exclusive and in lieu of all others, whether oral or written, expressed or implied. [. . . ]