User manual BELINEA 101927

[. . . ] [ USER MANUAL LCD-Monitor Belinea 10 19 27 ] BELINEA PREMIUM SERVICE English The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. Please visit http://www. belinea. com or call the numbers below for further warranty or service information. Die Garantie fr Ihren Belinea-Monitor betrgt drei Jahre und umfasst alle Bauteile. [. . . ] Here, click the "Belinea_Treiber_Driver" directory and download the Belinea. inf and README_Belinea. TXT files. Monitor setup under Windows NT 4. 0: Under Windows NT 4. 0 no separate setup file is required. Select the vertical frequency and the number of colors directly from within the "Settings" "Control Panel" "Display" "Settings" menu. BASIC SETUP Automatic image adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You can adjust the image settings (such as brightness, contrast, image position, phase, etc. ) manually or by using the LCD monitor's automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. The monitor allows you to make the following connections: analog graphics card via the D-Sub interface (see fig. Information: There is an optional OSD window (On/ Off) that displays the newly adjusted screen resolution settings. Resolution Notice: The optimum resolution for this monitor is 1280 1024. Color Regulates the color temperature settings. Press the option by pressing the or to select R (red), SELECT/AUTO button and G (green) or B (blue). values using the You can also choose one of the preprogrammed color temperatures 9300 K, 6500 K or sRGB (D65). Position Regulates the horizontal and vertical position of the image. Use the SELECT/AUTO button and or to set the horito set the vertical position and zontal position. Tracking Clock: Sets up the internal clock. Larger values make the displayed image appear wider; smaller values make it appear compressed. Phase: Adjusts the internal clock's time lag in order to optimize the screen image. Belinea 10 19 27 - Operating Instructions - 6 ENGLISH TROUBLESHOOTING Blank Screen Power indicator is off Check if the power cable is connected properly (see section "Connecting"). Make sure that the monitor was turned on using the power switch (see section "Startup"). Power indicator lights orange Perhaps a power saving mode is active?Press any key on your keyboard or move the mouse. Power indicator lights green A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. "No Signal" message Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?Is the PC turned on (see your PC's documentation)? Display Problems Image is displaced to the left/right or to the top/bottom If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter "Basic Setup", section "Automatic Image Adjustment" or chapter "OSD Menu Functions", section "Position". Image flickers or is shaky Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows 9x/ME/2000/NT/XP consult the "Configuration" section. Image is blurred Check brightness and contrast settings (see chapter "OSD Menu Functions", section "Brightness/Contrast"). Check the resolution setting (see "Other" functions in the "OSD Menu Functions" section). Color problems If the colors are off (e. g. white is not really displayed as white, etc. ), you should adjust the color temperature (see "Color" function in section "OSD Menu Functions"). TECHNICAL SPECIFICATIONS LCD panel Contrast ratio Viewing angle Response time Brightness Input signal Display colors Synchronization Video band width Ergonomic resolution Audio Power connection Power consumption 19 inch diagonal size (48. 3 cm visible), low radiation according to TCO '99, certified to ISO 13406-2, pixel fault class II, TN panel technology 550:1 (typical) / 650:1 (max. ) (Contrast ratio 10:1) horizontal 140, vertical 135 (typical) (Contrast ratio 5:1) horizontal 160, vertical 150 (typical) 3, 9 ms (with overdrive) 270 cd/m2 (typical) / 290 cd/m2 (max. ) Video: analog (15-pin Mini-D-SUB) and digital (24-pin DVI-D) 16. 2 mill. colors 3183 kHz horizontal, 5675 Hz vertical 135 MHz (pixel rate) 1280 1024 (60 Hz) Amplifier: 1 W at 8 Ohms Loudspeaker: 1 W continuous load, 1. 5 W peak power 100240 V AC, 50/60 Hz ON status: < 45 W; color of the status LED: green SLEEP status: < 4 W; color of the status LED: orange Power saving functions EPA certified Width: 426 mm, height: 437 mm, depth: 198 mm; 5. 0 kg (net) Operation: 0 to +40 C, humidity: 2080 % (without condensation) Storage: -20 to +60 C, humidity: 895 % (without condensation) Belinea 10 19 27 - Operating Instructions - 7 Dimensions/weight Operating environment ENGLISH DEFINITION OF THE MAXDATA WARRANTY The MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur within the product specific warranty period. [. . . ] The complete environmental criteria document may be ordered from: TCO Development - SE-114 94 Stockholm, Sweden - Fax: +46 8 782 92 07 - Email (Internet): development@tco. se Current information regarding TCO99 approved and labelled products may also be obtained via the Internet, using the address: http://www. tco-info. com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. [. . . ]