User manual BELINEA 101915

[. . . ] Please take the time to look through these instructions even if you are familiar with monitors. We have taken all possible care to ensure that this manual contains correct, accurate information. However, the manufacturer cannot assume liability for any possible errors. In addition, the manufacturer cannot guarantee that the hardware will meet the purpose you require. [. . . ] Save the original box and packing material in case you have to ship or transport the monitor. When the base of the monitor is extended, you can tilt the monitor 90 (Pivot function). Audio cable Power cord VGA cable DVI-D cable (optional) Figure 1. Monitor with swivel base CONNECTING To connect the monitor to your PC . . . . . . . . . . . . . . . . . . . . . . . . If you have a graphic card with a digital DVI-D connector (24-pin socket), then connect one end of the DVI-D cable (optional) to the DVI-D connector of your monitor (see fig. Connection via the DVI-D interface D-SUB AUDIO IN Signal cable D-SUB AUDIO IN 2 1 Figure 2a. Connecting the monitor to the PC To connect the monitor to the power source . . . . . . . . 3) to the Connecting the audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If your computer is equipped with an audio output port, then connect one end of the sound cable to the audio input connector of the monitor ( in fig. 3) and the other end to the Line-Out connector of the computer. Figure 3. First start your PC and then turn on your Belinea monitor using the power switch ( in fig. Adjust the image to meet your requirements (see the following sections "Basic Setup" and "Image settings using the OSD menu"). If there is no image displayed on the monitor, consult the section "Troubleshooting". ENGLISH CONFIGURATION Monitor setup under Windows 9x/ME/2000 and XP: If using the monitor under Windows 9x/ME/2000 or XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea dealer or download it from the MAXDATA FTP server at ftp. maxdata. com. Here, click the "Belinea_Treiber_Driver" directory and download the Belinea. inf and README_Belinea. TXT files. Follow the installation instructions in the README_ Belinea. TXT file. Monitor setup under Windows NT 4. 0: Under Windows NT 4. 0 no separate setup file is required. Monitor features Belinea 10 19 15 - Operating Instructions - 5 ENGLISH OSD MENU FUNCTIONS BRIGHTNESS / CONTRAST Brightness: Adjusts brightness by using the in fig. buttons < or > ( and Contrast: Adjusts screen contrast by using the in fig. buttons < or > ( and COLOR This menu lets you select a preset color temperature (9300K, 6500K or sRGB (D65)) by pressing and in fig. the OSD buttons < or > ( Changes to the color temperature take immediate effect on screen. If you wish to set individual color values, select the Custom Color option. 4) to select the red, green and blue settings and set the desired value using the OSD buttons < or > ( and in fig. The current settings are automatically saved when you return to the previous level or exit the OSD menu. IMAGE CONTROL Auto Adjustment: Automatically selects the optimal settings for image parameters (image position, phase, etc. ) by using the button MENU ( in fig. [. . . ] This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO'03 Display requirements: Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000 Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www. tcodevelopment. com Austria MAXDATA Computer GmbH Ignaz-Kck-Strae 9 A-1210 Wien Benelux MAXDATA Benelux B. V. [. . . ]