User manual BELINEA 101901

[. . . ] [ USER MANUAL LCD-Monitor Belinea 10 19 01 ] BELINEA PREMIUM SERVICE The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. Please visit http://www. belinea. com or call the numbers below for further warranty or service information. Die Garantie fr Ihren Belinea-Monitor betrgt drei Jahre und umfasst alle Bauteile. [. . . ] Select the vertical frequency and the number of colors directly from within the "Settings" "Control Panel" "Display" "Settings" menu. BASIC SETUP Automatic Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You can adjust the image settings (such as image position, phase, etc) manually or by using the LCD monitor's automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. You can adjust contrast and brightness directly by pressing the or buttons ( and in fig. Press the button to increase the contrast/brightness or to decrease it. OSD Time Out: Determines how long (in seconds) the OSD menu waits before closing automatically after no action has been performed. Contrast/Brightness Adjusts screen contrast and brightness. 4) to switch between the two functions. Color Adjust This menu lets you select a preset color temperature (9300 K, 6500 K or sRGB (D65)) by pressing the or OSD buttons. If you wish to set individual color values, select the User Color option. 4) to select the red, green and blue settings and set the desired value using or OSD buttons. When you are happy with the the color settings, press the 1 OSD button ( in fig. 4) twice to return to the OSD main menu. Memory Recall Restores factory display settings. Audio Menu Opens the menuitems Volume and Mute On/Off. Mute On/Off: You can mute sound output or switch the sound back on. Information Displays the current screen resolution together with horizontal and vertical frequency (no settings possible) as well as the model and serial numbers. Image Adjust H. /V. Sharpness: Controls image sharpness (only for resolutions less than 1280 1024 pixels). Belinea 10 19 01 - Operating Instructions - 6 ENGLISH TROUBLESHOOTING Blank Screen Power indicator is off Make sure the power cable is connected properly (see section "Connecting"). Make sure that the monitor was turned on using the power switch (see section "Startup"). Power indicator lights orange Perhaps a power saving mode is active?Press any key on your keyboard or move the mouse. Power indicator lights green A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. "No Signal" message Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?Is the PC turned on (see your PC's documentation)? Display Problems Image is displaced to the left/right or to the top/bottom If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter "Basic Setup", section "Automatic Image Adjustment" or chapter "OSD Menu Functions", section "Image Adjust". Image flickers or is shaky Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows 95/98/ ME/2000/NT/XP consult the "Configuration" section. Image is blurred Check brightness and contrast settings (see chapter "OSD Menu Functions", section "Contrast/Brightness"). Check the image noise and sharpness setting (see "Fine Tune" and "Sharpness" functions in the "OSD Menu Functions" section). Color problems If the colors are off (e. g. white is not really displayed as white etc), you should adjust the color temperature (see "Color Adjust" function in section "OSD Menu Functions"). TECHNICAL SPECIFICATIONS LCD panel Contrast ratio Viewing angle Response time Brightness Input signal Display colors Synchronization Video band width Ergonomic resolution Audio Power connection Power consumption 19 inch diagonal size (48, 3 cm visible), low radiation according to TCO '99, certified to ISO 13406-2, pixel fault class II, TN panel technology 500:1 (typical) (contrast ratio 10:1) horizontal 140, vertical 130 (typical) (contrast ratio 5:1) horizontal 160, vertical 150 (typical) 12 ms (typical) 250 cd/m2 (typical) Video: analog, 15 pin mini D-SUB 16. 2 mill. colors 3080 kHz horizontal, 5075 Hz vertical 135 MHz (pixel rate) 1280 1024 (60 Hz) Amplifier: 1 Watt at 8 Ohms Loudspeaker: 1 Watt continuous load, 2 Watts peak power 100240 V AC, 5060 Hz ON status: max. [. . . ] The complete environmental criteria document may be ordered from: TCO Development - SE-114 94 Stockholm, Sweden - Fax: +46 8 782 92 07 - Email (Internet): development@tco. se Current information regarding TCO99 approved and labelled products may also be obtained via the Internet, using the address: http://www. tco-info. com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. [. . . ]