User manual BELINEA 101735

[. . . ] In addition, the manufacturer cannot guarantee that the hardware will meet the purpose you require. We would appreciate reports of any errors, suggestions or criticism. TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not use any solvents to clean the monitor, as the housing could be damaged. For more information about cleaning the monitor, please see "Caring for Your LCD Monitor". The monitor may only be opened and serviced by qualified professionals. Notes on power connection Only use the power cord designated for use in your country. Pulling the power plug is the only way to disconnect the monitor from the power source. MAXDATA is an ENERGY STAR partner and guarantees that this device complies with the ENERGY STAR guidelines for optimizing power consumption. Note on resolution All resolutions provided by the graphics card that deviate form the physical resolution of the panel are adjusted by interpolation. This can impair the image quality. Notes on ergonomics In order to relieve your eyes, neck and shoulder muscles when looking at the screen, we recommend that you maintain a distance of 50 to 75 cm between the monitor and your eyes. In addition, you can relax your eyes by regularly focusing on an object at a distance of about 6 m. To achieve an ergonomic sitting position, your elbows, pelvis, knees and ankles should form a right angle. Safety instructions for operation The power cord must not be damaged. Do not place any objects on the power cord and make sure it does not have any knots. To unplug the cord, always pull on the plug and not on the cable itself. CARING FOR YOUR LCD MONITOR First, unplug the power cord from the wall socket. Clean the display surface only with a soft cloth, otherwise you may damage the display's coating. The monitor offers the following connection options: analogue graphics card via the 15-pin Mini-D-SUB port (see figure 2a); digital graphics card via the DVI-D port (see figure 2b). IMAGE SETTINGS USING THE OSD MENU The OSD menu is a window on your screen that allows you to view and change display settings. Select the desired submenu by pressing the OSD button - or + ( and in fig. If you selected a submenu, now select the subfunction you want using the - or + ( and in fig. The OSD menu automatically disappears if no changes are made for more than 30 seconds (default setting). Make sure that the monitor was turned on using the power switch (see section "Startup"). Power indicator lights orange Perhaps a power saving mode is active? Power indicator lights green A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. "No Signal Input" message Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?Is the PC turned on (see your PC's documentation)? Display Problems Image is displaced to the left/right or to the top/bottom If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter "Basic Setup", section "Automatic Image Adjustment" or chapter "OSD Menu Functions", section "Image". Image flickers or is shaky Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows 95/98/ ME/2000/NT/XP consult the "Configuration" section. Image is blurred Check brightness and contrast settings (see chapter "OSD Menu Functions", sections "Brightness" and "Contrast"). Check the sharpness setting (see "Fine" function in the "OSD Menu Functions" section). Color problems If the colors are off (e. g. white is not really displayed as white etc), you should adjust the color temperature (see "Color Temperature" function in section "OSD Menu Functions"). TECHNICAL SPECIFICATIONS LCD panel Contrast ratio Viewing angle Response time Brightness Input signal Display colors Synchronization Video band width Ergonomic resolution Audio Power connection Power consumption 19 inch diagonal size (48. 26 cm visible), low radiation according to TCO '03, certified to ISO 13406-2, pixel fault class II, Premium MVA panel technology 1000:1 (typical) (Contrast ratio 10:1) horizontal 170, vertical 170 (typical) (Contrast ratio 5:1) horizontal 170, vertical 170 (typical) Rise and Fall time: 8 ms g/g (typical) 250 cd/m2 (typical) Video: analog (15-pin mini D-Sub) and digital (DVI-D) 16. 7 mill. [. . . ] This also applies in particular with regard to claims for damages as a result of default, damages for claims arising as a result of defects, loss of profit, transport damage that was not registered within a period of 6 days after receipt of the goods, loss of data or information through repair processes or damage resulting from interruption to operations. Governing law: All rights and duties are subject to the law of the country in which the MAXDATA product was purchased. The Agreement on Contracts for the International Sale of Goods (CISG) is not applicable. Data Backup: The responsibility for complete data backups, including of applications and operating system software remains exclusively with the customer. MAXDATA excludes liability for any data or information lost for this reason during a warranty claim. For further details regarding the MAXDATA warranty conditions please refer to www. maxdata. co. uk. Belinea 10 19 20 - Operating Instructions - 9 Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. [. . . ]