User manual BELINEA 101710

[. . . ] [ USER MANUAL LCD-Monitor Belinea 10 17 10 ] BELINEA PREMIUM SERVICE English The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. Please visit http://www. belinea. com or call the numbers below for further warranty or service information. Die Garantie fr Ihren Belinea-Monitor betrgt drei Jahre und umfasst alle Bauteile. [. . . ] If there is no image displayed on the monitor, consult the section "Troubleshooting". Belinea 10 17 10 - Operating Instructions - 4 ENGLISH CONFIGURATION Monitor setup under Windows 9x/ME/2000 and XP: If using the monitor under Windows 9x/ME/2000 or XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea dealer or download it from the MAXDATA FTP server at ftp. maxdata. com. Here, click the "Belinea_Treiber_Driver" directory and download the Belinea. inf and README_Belinea. TXT files. Monitor setup under Windows NT 4. 0: Under Windows NT 4. 0 no separate setup file is required. Select the vertical frequency and the number of colors directly from within the "Settings" "Control Panel" "Display" "Settings" menu. BASIC SETUP Automatic Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You can adjust the image settings (such as image position, phase, etc) manually or by using the LCD monitor's automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. You can mute or activate sound playback by pressing the - button ( in fig. 4) while the OSD menu is not displayed. IMAGE SETTINGS USING THE OSD MENU The OSD menu is a window on your screen that allows you to view and change display settings. When you have configured all colour values as wished, use the OSD key MENU ( in figure 4) to return to the OSD main menu. i Information Displays the current graphics resolution including the vertical frequency (no configuration possible). Image Horizontal Size: Controls the horizontal image size. Auto Adjust: Automatically selects the optimal settings for image parameters (image position, phase, etc). Belinea 10 17 10 - Operating Instructions - 6 ENGLISH TROUBLESHOOTING Blank Screen Power indicator is off Make sure the power cable is connected properly (see section "Connecting"). Make sure that the monitor was turned on using the power switch (see section "Startup"). Power indicator lights orange Perhaps a power saving mode is active? Power indicator lights green A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. "No Signal Input" message Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?Is the PC turned on (see your PC's documentation)? Display Problems Image is displaced to the left/right or to the top/bottom If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter "Basic Setup", section "Automatic Image Adjustment" or chapter "OSD Menu Functions", section "Image ". Image flickers or is shaky Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows 95/98/ ME/2000/NT/XP consult the "Configuration" section. Image is blurred Check brightness and contrast settings (see chapter "OSD Menu Functions", sections "Brightness" and "Contrast"). Check the sharpness setting (see "Fine" function in the "OSD Menu Functions" section). Color problems If the colors are off (e. g. white is not really displayed as white etc), you should adjust the color temperature (see "Color Temperature" function in section "OSD Menu Functions"). TECHNICAL SPECIFICATIONS LCD panel Contrast ratio Viewing angle Response time Brightness Input signal Display colors Synchronization Video band width Ergonomic resolution Audio Power connection Power consumption 17 inch diagonal size (43. 18 cm visible), low radiation according to TCO '99, certified to ISO 13406-2, pixel fault class II, TN panel technology 700:1 (typical) (Contrast ratio 10:1) horizontal 150, vertical 135 (typical) (Contrast ratio 5:1) horizontal 154, vertical 145 (typical) Rise time: 2 ms, Fall time: 8 ms (typical) 300 cd/m2 (typical) Video: analog, 15-pin mini-D-SUB 16. 2 mill. colors 3081 kHz horizontal, 5676 Hz vertical 135 MHz (pixel rate) 1280 1024 (60 Hz) Amplifier: 1 Watt at 8 Ohms Loudspeaker: 1 Watt continuous load, 1 Watt peak power 100240 V AC, 5060 Hz ON status: max. 2 W; color of the status LED: orange Power saving functions EPA certified Width: 376 mm, height: 376 mm, depth: 200 mm; 4. 0 kg (net) Operation: 0 to +40 C, humidity: 2080 % (without condensation) Storage: -20 to +60 C, humidity: 895 % (without condensation) Dimensions / weight Operating environment Belinea 10 17 10 - Operating Instructions - 7 ENGLISH DEFINITION OF THE MAXDATA WARRANTY The MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur within the product specific warranty period. The warranty period begins on the date of purchase (date of original customer invoice). [. . . ] The complete environmental criteria document may be ordered from: TCO Development - SE-114 94 Stockholm, Sweden - Fax: +46 8 782 92 07 - Email (Internet): development@tco. se Current information regarding TCO99 approved and labelled products may also be obtained via the Internet, using the address: http://www. tco-info. com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. [. . . ]