User manual BEHRINGER WD300

[. . . ] WARP DISTORTION WD300 Thank you for showing your confidence in us by purchasing the BEHRINGER WARP DISTORTION WD300. This high-quality effects pedal enables you to produce super thick, tube-like distortion plus endless sustain. [. . . ] As soon as you insert the plug into the IN connector, the WD300 is on. This extends the life of the battery. WARP DISTORTION WD300 The SERIAL NUMBER is located at the underside. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS In Connector Impedance Out Connector Impedance Power supply 1/4" TS 1 k 9V , 100 mA regulated BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz Europe/U. K. /Australia 230 V~, 50 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Japan 100 V~, 50/60 Hz 2 mm DC jack, negative center 9 V type 6LR61 30 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) 1/4" TS 500 k Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. SAFETY INSTRUCTIONS Do not use near water, or install near heat sources. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. [. . . ] No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. [. . . ]