User manual BEHRINGER US600

[. . . ] Controls Top view The D TIME/SPEED control has 2 different functions depending on the effect mode selected. For TREM BAR and FLUTTER mode it adjusts the speed of the pitch change. The BALANCE control adjusts the balance between the direct signal and the effect signal in PITCH SHIFTER, DETUNE and HARMONIST mode. [. . . ] Use the PITCH control to adjust the amount of detuning and the D TIME/SPEED control to determine the delay time. TREM BAR: Detunes the input signal with a maximum of 2 octaves above or below similar to the effect created with a guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to reach the defined pitch value. FLUTTER: Detunes the input signal periodically with a maximum of 1 octave above or below similar to the effect created with a fast moving guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/ SPEED control to determine the time used to reach the defined pitch value. The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. If both outputs are used they will output different signals in the modes PITCH SHIFTER, HARMONIST and DETUNE. OUT A will have the pitch shifted signal while OUT B will have the input signal. In TREM BAR and FLUTTER mode both outputs will have the pitch shifted signal. ULTRA SHIFTER/HARMONIST US600 Use the 1/4" TRS EXP/CTL connector to connect an expression pedal. Then push it to the forward position and choose the desired pitch value with the PITCH control. Now you can control the pitch value of the effect within the range defined by the PITCH control (low position = no pitch shift, forward position = maximum pitch shift). Use the DC IN connection to plug in a 9 V power supply (not included). To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. As soon as you insert the plug into the IN connector, the US600 begins running. + In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. [. . . ] , . Die deutsche Anleitung ist erhältlich @ www. behringer. com Manuel francophone en téléchargement sur www. behringer. com Manual en español disponible en www. behringer. com Manuali italiani disponibili @ www. behringer. com @ www. behringer. com Polska instrukcja dostêpna jest pod adresem @ www. behringer. com Nederlandse handleiding beschikbaar @ www. behringer. com Suomenkielinen käyttöohje saatavilla osoitteesta www. behringer. com Svensk manual finns tillgänglig på www. behringer. com Dansk vejledning findes på @ www. behringer. com Manual português disponível @ www. behringer. com Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www. behringer. com Technical specifications and appearance subject to change without notice. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. [. . . ]