User manual BEHRINGER UCA200

[. . . ] It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very ambitious goal: to develop a first rate unit, which is flexible enough to be used mobile as well as within studio setups. The task to design our new UCA200 certainly meant a great deal of responsibility. You, the discerning user and musician, were the focus of our entire development efforts. Developing a product usually brings a lot of people together, and what a great feeling it is when everybody who participated in such a project can be proud of what we've achieved. [. . . ] 1. 1. 2 Initial operation Please make sure the unit is provided with sufficient ventilation, and never place the UCA200 on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating. The current supply is made via the USB connecting cable, so that there is no external power supply unit required. INTRODUCTION 9 DEUTSCH U-CONTROL UCA200 1. 1. 3 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www. behringer. com (alternatively www. behringer. de) and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www. behringer. com/support). Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. INTRODUCTION U-CONTROL UCA200 The UCA200 is PC and Mac-compatible. Therefore, no installation procedure or drivers are required for the correct functioning of the UCA200. To work with the UCA200, your computer must fulfill the following ninimum requirements: PC Intel or AMD CPU, 400 MHz or higher ® ® MAC® G3, 300 MHz or higher minimum 128 MB RAM USB 1. 1 interface ® Mac OS X 9. 0. 4 or higher minimum 128 MB RAM USB 1. 1 interface ® Windows XP, 2000 2. 1 Hardware connection Use the USB connecting cable supplied with the UCA200 to connect the unit to your computer. You can connect a variety of devices and equipment to the inputs and outputs. 2. 3. 1: Top view of the UCA200 The LED indicates the status of the USB power supply. 12 3. OPERATING ELEMENTS AND CONNECTIONS U-CONTROL UCA200 3. 2 Connections 2 3 Fig. 3. 2: Connections of the UCA200 Use the LINE-OUT jacks for audio cables with cinch connectors. OPERATING ELEMENTS AND CONNECTIONS 13 DEUTSCH U-CONTROL UCA200 4. Connect the outputs of the subgroup (in this case ALT 3-4 OUT) with the inputs of the UCA200 You can choose to connect the outputs of the interface either to the TAPE INPUT sockets or to your monitor speakers. Over the headphone output of your mixing console, you can connect for example the stereo headphones HPS 3000 to controling. Use the USB cable supplied with the unit to connect your PC or MAC® via the USB interface. By routing each channel that you want to record through the ALT3-4 subgroup, you can now use the input channels of the mixing console to record different signals (e. g. [. . . ] The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Mac and the Mac Logo are trademarks of Apple Computer, Inc, registered in the US and other countries. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. [. . . ]