User manual BEHRINGER GX112

[. . . ] GX112 Users Manual Version 1. 2 December 2001 BLUE DEVIL ® ENGLISH BLUE DEVIL GX112 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. [. . . ] In general, you can adjust the reverb time with the PARAMETER control, while the two EFFECT controls adjust the mix between original and effect signals of the left or right channel. 13-14 Gated Reverb: This reverb is cut off abruptly and became famous through Phil Collins In the air tonight. Use the EFFECT A control to adjust the threshold above which the reverb is triggered (Sensitivity). Again, the PARAMETER control adjusts the reverb and gate time. Preset-Nr. Density PARAMETER EFFECT A EFFECT B Gate Time Sensitivity Mix Gate Time Sensitivity Mix Tab. EFFECTS PROCESSOR 13 BLUE DEVIL GX112 15-16 Ambience: The reverb of any room consists of so-called early reflections and the reverb tail. Since our ears use these reflections to determine the room size, they can be employed to create subtle and impressive reverb densities, without clouding the overall signal with long reverb tails. The PARAMETER control modifies the room size, while EFFECT A adjusts the pre-delay time, and EFFECT B governs the mix between original and effect signals. Preset-Nr. 3. 3: Parameters of effects 15 and 16 17-26 Wah/Delay/Distortion: In general, filters are used to provide some static equalization of a signals frequency response. The wah effect combined with delay and distortion in this preset allows the mid-range frequencies to pass, while it more or less suppresses the remaining frequency ranges. Guitarists such as Jimi Hendrix and Eric Clapton made this effect popular, and it still hasnt gone out of fashion. EFFECT A allows you to determine the distortion intensity, which also depends on the volume settings chosen in the HEAVEN and HELL channels. Using MIDI controller #15 you can edit the operating range of the wah effect, e. g. In this way, it is possible to use the wah effect like an analog wah foot pedal. Preset-Nr. Effect Variation PARAMETER EFFECT A EFFECT B 17 Feedback 0 % Delay Time Drive Delay Mix WAH / DELAY / 18 Feedback 10 % Delay Time Drive Delay Mix DISTORTION Feedback 30 % Delay Time 19 Drive Delay Mix Tab. 3. 4: Parameters of effects 17 through 19 20 Delay/Reverb: After a normal delay with adjustable delay time, the signal passes a reverb with different reverb times that are preset by various variations. Preset-Nr. Effect 20 DELAY / REVERB Variation PARAMETER EFFECT A EFFECT B Delay Time Delay Mix Reverb Mix Tab. 3. 5: Parameters of effect 20 21-29 Delay: This algorithm delays the input signal and generates several repeats. The first four presets (21 through 24) produce a stereo delay, with the PARAMETER control setting the delay time for the right channel. The left channels delay time is 2/3 as long as that on the right side. As usual, EFFECT A and EFFECT B determine the mix between original and effect signals. Delay presets 25 through 29 offer long mono delays, which can be adjusted in their delay time (PARAMETER control), delay feedback (repeats, EFFECT A control) and delay mix parameters (EFFECT B control). 14 3. [. . . ] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER. Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealers invoice. Any product deemed eligible for repair or replacement by BEHRINGER under the terms of this warranty will be repaired or replaced within 30 days of receipt of the product at BEHRINGER. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. [. . . ]