User manual BEHRINGER DR400

[. . . ] DIGITAL REVERB/DELAY DR400 Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL REVERB/DELAY DR400. This Reverb/Delay effects pedal delivers 24-bit high-resolution stereo reverb and delay effects. [. . . ] To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. Tap delay time - DIGITAL REVERB/DELAY DR400 The DR400 has no On/Off switch. In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN OUT A / OUT B Power supply Connector ¼" TS; 500 kOhm Connector ¼" TS; 1 kOhm 9 V_, 100 mA regulated BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50/60 Hz Europe/Australia 230 V~, 50 Hz Japan 100 V~, 50/60 Hz 2 mm DC jack, center negative 9 V type 6LR61 65 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. SAFETY INSTRUCTIONS Do not use near water, nor install near heat sources. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. Betreibe das Gerät nicht in der Nähe von Wasser oder Wärmequellen. [. . . ] Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. [. . . ]