User manual BEHRINGER DJX750

[. . . ] User Manual PRO MIXER DJX750 Professional 5-Channel DJ Mixer with Advanced Digital Effects and BPM Counter Your purchase of the BEHRINGER PRO MIXER DJX750 has put you at the forefront of today's trends in DJ mixing consoles. Numerous features, such as beat counter, insert loop and digital effects processor, enable you to work in completely new and creative ways. The DJX750 is a mixer for professional use, it is extremely easy to operate and it helps you give free rein to your creativity. Time is tight and if you don't want to be left in the dust, you'd better get moving. [. . . ] The widening of the stereo base makes for a livelier, more transparent sound. You can determine the intensity of the effect by using the SURROUND control [27], while the XPQ ON switch [28] turns the XPQ effect on (the respective LED is lit). XPQ 3D surround effect When no signal is present (or when the signal level is too low), the BPM display shows only dashes. When the signal is present but can not be identified, the display shows 160 BPM and then shows the said dashes. Therefore, "160" BPM is no usable value; rather, it is simply an error message when the signal can not be analyzed. The extent of the difference in tempo is indicated by a corresponding swing to the right (signal A is slower) or to the left (signal B is slower). The TIME OFFSET LED [23] below that displays the signal A and B synchronisation. Should the display move to the left or right, the channels are not synchronised. The TEMPO DIFFERENCE and TIME OFFSET displays are only active if the tempi of both channels have been fixed in one of the ways described. Auto BPM counter 2 3 LFO Rate Delay Time Delay 1/1 (related to BPM) Delay Time Delay 3/4 (related to BPM) Delay Time Delay 1/2 (related to BPM) Delay Time Echo 1/1 (related to BPM) Delay Time Echo 3/4 (related to BPM) Delay Time Echo 1/2 (related to BPM) Reverb Big Plate Reverb Time (Decay) Reverb Small Chamber Reverb Time (Decay) Reverb Bright Room Reverb Time (Decay) Reverb Voice Widener Tone Big Plate Delay Time Reverb/Delay + Delay (related to BPM) Phase Shifter 4 LFO Rate Phase Shifter Fall LFO Rate Phase Shifter Rise LFO Rate Panning Panning LFO Rate Panning Tremolo LFO Rate Sim/Dyn Ultrabass Frequency Sim/Dyn Ultrafex Frequency Sim/Dyn Voice Changer Distortion ENGLISH 5 6 The DJX750 features an internal digital effects processor into which you can feed your master signal, the signals of the input channels or the mic signal. The module provides a number of standard effects, such as reverb, delay and echo, as well as various filter and modulation effects. · To select the signal to be processed, use the SOURCE selector (33). · Press and hold the PROGRAM control for about 2 seconds to load the selected preset. · When the new effect has been loaded, turn the PROGRAM control (35) to change the effect's parameters. View the table (column "Ajustable Parameter") to see which parameter of the selected effect can be modified. The parameter values of the delay and echo effects are displayed in BPM (beats per minute). The display only shows two digits and so values of 100 and above are represented with a dot behind the number (for example, 120 BPM is displayed as "20. "). · Use the LEVEL control (36) to determine the volume level of the effect signal. · Activate the effect signal by pressing the FX ON switch (37). Press the PROGRAM control one more time to use it for selecting effects again. PRO MIXER DJX750 User Manual [39] The PHONO inputs for channels 2 to 4 are for connecting a turntable. [41] With the PHONO/LINE switch it is possible to switch the input sensitivity of the PHONO inputs 2 to 4 to line level. This allows you to connect a tape deck or a CD player to the PHONO inputs. ENGLISH Connections Rear panel connectors [38] These are the LINE i. Unlike other channels, channel 1 features two line inputs. [42] The DJX750 features an integrated effects loop for the connection of an external effects device. The MONITOR signal is taken at the SEND output and routed, for example, to a reverb processor. [. . . ] Thank you for your cooperation! [3] Free inspections and maintenance/repair work are expressly excluded from this warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts. [4] Damage/defects caused by the following conditions are not covered by this § 3 Warranty [1] BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the warranty regulations described below. If the product shows any defects within the specified warranty period that are not excluded from this warranty as described under § 5, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts. warranty: · improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; · connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; · damage/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. [5] Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. [6] If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. [2] If the warranty claim proves to be justified, the product will be returned to the user freight prepaid. [7] Products which do not meet the terms of this warranty will be repaired exclusively at the buyer's expense. [. . . ]