User manual BEHRINGER DEQ1024

[. . . ] DEQ1024 Users Manual Version 1. 0 June 2003 ULTRAGRAPH DIGITAL ENGLISH ULTRAGRAPH DIGITAL DEQ1024 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] through a digital mixing console), you have to select the DIG IN setting (yellow LED lights up). + If you select the DIG IN setting, although no signal is connected to the digital input, the DEQ1024 is not able to synchronise with any sample frequency (yellow DIG IN LED is blinking). In this case the ULTRAGRAPH DIGITAL switches to the sample frequency last connected to the digital input. If you connect a signal to the digital input while operating in the unsynchronised mode, your DEQ1024 switches back to normal mode and synchronises with the connected sample frequency (yellow LED lights up). 8 2. CONTROL ELEMENTS ULTRAGRAPH DIGITAL DEQ1024 2. 2 Rear panel Fig. 2. 7: Rear panel control elements and connectors The balanced XLR and 1/4" TRS inputs are used for connecting an analog input signal. The analog output signal of the DEQ1024 can be taken by using these balanced XLR and 1/4" TRS connectors. LEVEL switches increase the maximum signal level on the analog inputs and outputs from +12 dBu to +22 dBu. You can selectively connect an input signal in the AES/ EBU format (via the XLR connector) or in the S/PDIF format (via the RCA connector) to the digital inputs. In PRE EQ and POST EQ modes, these connectors can also be used as insert returns (see ). Here, you can connect the output of your dynamics processor or similar equipment. Never connect a signal simultaneously to the AES/EBU and to the S/PDIF input. The output signal is available on the digital output in the AES/EBU format (XLR connector) and in the S/PDIF format (RCA connector). In PRE EQ or POST EQ mode you can use these connectors as insert sends (see ). Connect the input of your external dynamics processor or similar equipment here. Unlike with the digital inputs, both digital outputs can be used simultaneously. The POWER switch should always be in its Off position when you are about to connect the DEQ1024 to the mains. Attention: The POWER switch does not fully disconnect the unit from the mains. Unplug the power cord completely when the unit is not used for prolonged periods of time. You can exchange blown fuses that are located in the FUSES COMPARTMENT of your DEQ1024. Please take the time to fill in and return the warranty card within 14 days after the date of purchase. APPLICATIONS The flexible concept of the ULTRAGRAPH DIGITAL, with its wide-ranging possibilities for audio processing, opens up many application options. We will now present to you some of those possibilities with their typical settings. + + Fig. [. . . ] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER. Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealers invoice. Any product deemed eligible for repair or replacement by BEHRINGER under the terms of this warranty will be repaired or replaced within 30 days of receipt of the product at BEHRINGER. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. [. . . ]