User manual BEHRINGER ADI21

[. . . ] BEHRINGER V-TONE ACOUSTIC ADI21 WELCOME TO BEHRINGER Thank you for showing your confidence in us by purchasing the V-TONE ACOUSTIC ADI21. This high-quality acoustic guitar driver is designed for all acoustic guitar players who are looking for more sounds to reach maximum flexibility and creativity. Thanks to its high-performance EQ section (including parametric mids) and the integrated Tube/Microphone Emulation, the ADI21 gives your guitar natural sound with smooth saturation, just as if it were being miked. [. . . ] Use the MID control to boost or cut the mid-range frequencies (+/-12 dB). The MID FREQ control lets you select the middle frequency (170 Hz to 3. 5 kHz) that will be boost/cut. The BLEND control activates the integrated tube/ microphone emulation circuitry. If you want to hear some of the distinct timbre of a piezo pickup or reduce the amount of compression, simply turn the control counterclockwise. When activated, the GND LIFT disconnects the ground connection between input and output. Depending on the grounding of the connected equipment, this can eliminate hum or ground loops. The -20 dB PAD switch attenuates the output level of the BAL OUT (see ) by -20 dB. It should be activated when the output level is too high for the microphone input of the mixer channel. Open the lid to install or replace the 9 V battery (see also chapter POWER REQUIREMENTS). To prolong battery life, always disconnect the input when the driver is not in use. + BEHRINGER V-TONE ACOUSTIC ADI21 Use the DC IN connection to plug in a 9 V power supply (not included). For details please refer to chapter POWER REQUIREMENTS. SAMPLE SETTINGS APPLICATIONS Use with other instruments The ADI21 is not only for acoustic guitars. bass/electric guitars, keyboards etc. ) to create new sounds and enhance your music. Please make sure that the input level is not too high to avoid overloading the ADI21. Direct to a mixing console For live and studio applications you can connect the balanced XLR BAL OUT directly to a mic input of a mixing console. Be sure not to overload the input by using the gain control of the respective channel. For further information please refer to the users manual of your mixing console. Use without instruments You can use the ADI21 without an instrument as an outboard processor connected to an insert or an effect path (aux send/ return) of your mixing console to affect the signal of a particular channel. For further information please refer to the users manual of your mixing console. POWER REQUIREMENTS Battery: Utilizes standard 9 V alkaline battery (not included). [. . . ] +49 2154 9206 0, Fax +49 2154 9206 4903 Connector Impedance Balanced output Connector Impedance Power supply Power connector Battery Power consumption Dimensions Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. [. . . ]