User manual BEGLEC TAURUS VERSION 1.0

[. . . ] The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only This symbol means: Read instructions To protect the environment, please try to recycle the packing material as much as possible. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. [. . . ] uP button: to go up in the menu and to increase the values shown on the display. MAIN MENU: To select any of the menu options, press the MENU button up to when the required one is shown on the display. once the required menu option is selected , press the ENTER button to select. To go back to the functions without any change press the MENU button or just wait 8 seconds. Whit an optional CPB-4 "Centerpiece bracket" you can make a fantastic combination of 4pcs TAURUS led. The result is a superb LED Centerpiece effect, really a must if you want an original and eye-catching effect!Mains output with IEC socket: you can use a special IEC power cable to connect this output with the mains input of the next TAURUS for easier linking. Hanging bracket with 2 knobs on both sides to fasten the unit and a mounting hole to fix a mounting hook. Sound LED: blinks to the rhythm of the music while the unit is in audio mode 12. DMX LED: is lit when the unit receives a DMX-signal Once the correct address shows on the display, press the ENTER button to save it. (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again for about 2seconds. Once the mode is selected, press the ENTER button to setup (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again for about 2seconds. Press the ENTER button, the current working mode starts blinking in the display Use the DOWN and UP buttons to select M A S T (master) or one of the 4 slave modes: S L 1 S L 4 . (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again for about 2seconds. Remarks: When only one unit is used, you should always select master mode. Show Mode Used to choose to select one of the preprogrammed shows when used in standalone or master/slave mode. Use DOWN and UP buttons to select one of the preprogrammed shows S h 0 (all shows played in random mode) to S H 1 1 (show 11) Once the right show blinks on the display, press the ENTER button to save it. (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again for about 2seconds. Sound Mode Used to choose the desired sound mode to trigger the shows. Use DOWN and UP button to select one of the available channel modes: (sound mode ON) the shows are triggered by the internal microphone. (sound mode OFF) the shows are triggered by the speed selected with the shows. Once the mode is selected, press the ENTER button to setup (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the MENU button again for about 2seconds. [. . . ] Utilisez les touches DOWN et UP pour sélectionner un des shows préprogrammés, de S h 0 (tous les shows sont joués en mode aléatoire) à S H 1 1 (show 11). (mode son désactivé) les shows sont pilotés par la vitesse des shows sélectionés Quand le mode est sélectionné, appuyez sur la touche ENTER pour confirmer (Où il retournera automatiquement aux fonctions principales sans aucune modification après 8 secondes) Pour retourner aux fonctions sans effectuer de changements, appuyez à nouveau sur la touche MENU Mode Black out Black out mode: quand aucun signal DMX est détecté, l'appareil se met en black out. Rien ne sera branché à son entrée DMX et sa LED « master » sera constamment allumée, tandis que la LED « sound » clignotera au rythme de la musique. Strobo asynchro sur la musique (LED éteinte) Parcourez les 12 shows en mode RAPIDE (LED allumée) Parcourez les 12 shows en mode LENT (LED clignote) Gebruik de DOWN en UP toetsen om één van de voorgeprogrammeerde shows S h 0 (alle shows worden uitgevoerd in willekeurige volgorde) tot S H 1 1 (show 11) te kiezen. [. . . ]