User manual BEGLEC LED BLASTER 108 V1.0
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEGLEC LED BLASTER 108. We hope that this BEGLEC LED BLASTER 108 user guide will be useful to you.
Manual abstract: user guide BEGLEC LED BLASTER 108V1.0
Detailed instructions for use are in the User's Guide.
[. . . ] DO NOT stand close to the equipment and stare directly into the LED light source. Always make sure that the supporting structure is solid and can support the combined weight of the products. Do not touch the power cables if your hands are wet.
ATTENTION
This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. [. . . ] To permanently store ADAS DMX addresses, select ADAS copy from the Settings menu, on the target fixtures to store the new DMX Address.
Example:
ID Addr. 1 ID Addr. 2 ID Addr. 3
DMX512 CONTROLLER
The figure above shows a simple ID address layout using one DMX address. Each of the units has a different ID address which will receive a new temporary DMX address when ADAS is activated (unless ADAS copy is selected). The user is able to activate and deactivate ADAS at will giving the possibility of creating many different fixture grouping possibilities using the ID address, real DMX address and the ADAS temporary DMX address.
Note:
When using ADAS, all fixtures must have the following settings from the Settings menu set correctly; ID address ID ON/OFF ADAS fader no ADAS ON/OFF
2 INSTALLATION
Each unit should have the target ID address set in ascending order Each unit should set ID On Each unit should be set to the same number of faders as your controller(must be 12) Each unit should be set as ADAS On
8 2008. 8. 13
. . . . . . . . . . . . . . . . . . . . . . . .
3
3. 1
DISPLAY PANEL OPERATION
BASIC
The LED fixture is mounted with a LCD display and 4 control buttons.
SET
UP
DOWN
EXIT
enter the currently selected menu or confirm the current function value scroll 'UP' through the menu list or increase the value of the current function scroll 'DOWN' through the menu list or decrease the value of the current function exit from the current menu or function
3 DISPLAY PANEL OPERATION
9
2008. 8. 13
3. 2
MENU
MENU
Static color Dimmer Red Green Blue Color macros Strobe Dimmer Red Green Blue Color macros Strobe
0 0 0 0 0 0
255 255 255 255 255 255
DMX512
Address
Address
1
512
Personality
STAGE 1 STAGE 2 PIXEL ARC 1 ARC 1+D
Run mode
DMX CON
Auto program
Auto Auto Auto Auto Auto Auto Auto Auto
1 2 3 4 5 6 7 8
Settings
ID address ID ON/OFF ADAS fader no ADAS ON/OFF ADAS copy R e s e t to Factory settings Dimmer start
ID address 001 06 6 ID ON/OFF ADAS fader no 01 244 ADAS ON/OFF ADAS copy ON/OFF Reset confirm
Dimmer start 001 / 005
Password
Password ON/OFF
Password ON/OFF Set Password
Set password
3 DISPLAY PANEL OPERATION
10
2008. 8. 13
3. 3
CREATING A STATIC COLOR
MENU
Static color Dimmer Red Green Blue Color macros Strobe Dimmer Red Green Blue Color macros Strobe
0 0 0 0 0 0
255 255 255 255 255 255
Static colour Combine RED, GREEN and BLUE to create an infinite range of colors (0-255) Enter Color macros allow to choose 18 color macros Set value of dimmer (0-255) Set the value of the strobe (0-20Hz)
3. 4
DMX512 SETTINGS
MENU
DMX512 Address 1 512
DMX512 address Enter the DMX address mode to set the DMX address Activate control from outside source by activating ON
3. 5
DMX CHANNEL MODE
MENU
Personality STAGE 1 STAGE 2 PIXEL ARC 1 ARC 1+D
Personality Enter Personality mode to choose DMX mode: PIXEL , ARC 1 or ARC 1+D . STAGE 1 , STAGE 2 ,
3. 6
RUN MODE
MENU
Run mode Enter the Run mode mode to set the working mode DMX mode is for using the DMX512 controller to control the fixtures. Both STAGE 1 and STAGE 2 have two DMX modse: DMX MODE 1 and DMX MODE 2 Ch9 is used to switch from one DMX MODE 1 (0-244) to DMX MODE 2 (245-255).
ARC 1
CHANNEL 1 VALUE
RED 0 5 4 255 No function 0-100% GREEN
FUNCTION
2
0 5
4 255
No function 0-100% BLUE
3
0 5
4 255
No function 0-100%
ARC 1+D
CHANNEL 1 VALUE
DIMMER 0 5 4 255 No function 0-100% RED
FUNCTION
2
0 5
4 255
No function 0-100% GREEN
3
0 5
4 255
No function 0-100% BLUE
4
0 5
4 255
No function 0-100%
4 USING A DMX512 CONTROLLER
14
2008. 8. 13
STAGE 1(DMX MODE 1)
CHANNEL 1 VALUE
RED 0 5 4 255 No function 0-100% GREEN
FUNCTION
2
0 5
4 255
No function 0-100% BLUE
3
0 5
4 255
No function 0-100% YELLOW
4
0 5
4 255
No function 0-100% CYAN
5
0 5
4 255
No function 0-100% PURPLE
6
0 5
4 255
No function 0-100% WHITE
7
0 5
4 255
No function 0-100% STROBE
8
0 5
4 255
No function Strobe (slow to fast) MODE SELECTION
0 5 35 65
4 34 64 94 124 154 184 214 244 255
No function Color-Cycle Mode 1 Color-Cycle Mode 2 Color-Cycle Mode 3 Color-Cycle Mode 4 (speed can be adjusted using Channel 11) Color-Cycle Mode 5 Color-Cycle Mode 6 Color-Cycle Mode 7 Color-Cycle Mode 8 DMX MODE 2
9
95 125 155 185 215 245
4 USING A DMX512 CONTROLLER
15
2008. 8. 13
CHANNEL
VALUE
0 10 20 9 19 29
FUNCTION
ID ADDRESS SELECTION (also see pg. 26) Select all ID addresses ID address #1 ID address #2 ID address #3
30 . 255 209 ID address #20 ID address #21 ID address #22 ID address #23
ID address #66 MODULE SELECTION
0 5 35 65
4 34 64 94 124 154 184 214 255 255
#1 ON #2 ON #3 ON #1 ON #2 ON #3 ON #1 ON #2 ON #2 ON #3 ON #1 ON #3 ON #1 ON #2 ON #3 ON #1 OFF #2 OFF #3 OFF Speed control of CH9 Color-Cycle Mode 4 EFFECT MACRO
11
95 125 155 185 215 0
0 5
4 9 . Effect MACRO #50
12
10
250
255
4 USING A DMX512 CONTROLLER
16
2008. 8. 13
STAGE 1(DMX MODE 2)
CHANNEL VALUE
MODULE #1 0 5 35 4 34 64 94 124 154 184 255 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE MODULE #2 0 5 35 4 34 64 94 124 154 184 214 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE MODULE #3 0 5 35 4 34 64 94 124 154 184 214 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE NO FUNCTION NO FUNCTION NO FUNCTION NO FUNCTION STROBE
FUNCTION
1
65 95 125 155 185
2
65 95 125 155 185
3
65 95 125 155 185
4 5 6 7 8
0 5 4 255
No function Strobe (slow to fast) MODE SELECTION
9
0 245
244 255
DMX MODE 1 DMX MODE 2
4 USING A DMX512 CONTROLLER
17
2008. 8. 13
CHANNEL
VALUE
0 10 20 9 19 29
FUNCTION
ID ADDRESS SELECTION (also see pg. 26) Select all ID addresses ID address #1 ID address #2 ID address #3
30 . 255
209
ID address #20 ID address #21 ID address #22 ID address #23
ID address #66 NO FUNCTION NO FUNCTION
11 12
4 USING A DMX512 CONTROLLER
18
2008. 8. 13
STAGE 2(DMX MODE 1)
CHANNEL 1 VALUE
DIMMER 0 5 4 255 No function 0-100% RED
FUNCTION
2
0 5
4 255
No function 0-100% GREEN
3
0 5
4 255
No function 0-100% BLUE
4
0 5
4 255
No function 0-100% COLOR MACROS
0 10 30 40 50 70 80 90 110
9 29 39 49 69 79 89 109 119 129 149 159 169 189 199 219 229 249 255
No function RED RED+GREEN RED+GREEN YELLOW RED+GREEN RED+GREEN GREEN GREEN+BLUE GREEN+BLUE BLUE BLUE+GREEN BLUE+GREEN CYAN GREEN+PURPLE PURPLE PURPLE+GREEN RGB WHITE STROBE (100%) (R85%+G15%) (R60%+G40%) (100%) (R15%+G85%) (R40%+G60%) (100%) (G85%+B15%) (G60%+B40%) (100%) (G85%+B15%) (G60%+B40%) (100%) (G50%+P50%) (100%) (P80%+G20%) (100%) (100%)
5
120 130 150 160 170 190 200 220 230 250
6
0 5
4 255
No function Strobe (slow to fast)
4 USING A DMX512 CONTROLLER
19
2008. 8. 13
CHANNEL
VALUE
0 5 35 65 4 34 64 94 124 154 184 214 244 255 No function
FUNCTION
MODE SELECTION
Color-Cycle Mode 1 Color-Cycle Mode 2 Color-Cycle Mode 3 Color-Cycle Mode 4 (speed can be adjusted using Channel 11) Color-Cycle Mode 5 Color-Cycle Mode 6 Color-Cycle Mode 7 Color-Cycle Mode 8 DMX MODE 2 ID ADDRESS SELECTION (also see pg. 26)
7
95 125 155 185 215 245
0 10 20
9 19 29
Select all ID addresses ID address #1 ID address #2 ID address #3
30 . 255 209 ID address #20 ID address #21 ID address #22 ID address #23
ID address #66 MODULE SELECTION
0 5 35 65
4 34 64 94 124 154 184 214 255 255
#1 ON #2 ON #3 ON #1 ON #2 ON #3 ON #1 ON #2 ON #2 ON #3 ON #1 ON #3 ON #1 ON #2 ON #3 ON #1 OFF #2 OFF #3 OFF Speed control of Ch7 Color-Cycle Mode 4 EFFECT MACRO
9
95 125 155 185 215 0
0 5
4 9 . Effect MACRO #50
10
10
250
255
4 USING A DMX512 CONTROLLER
20
2008. 8. 13
STAGE 2(DMX MODE 2)
CHANNEL VALUE
MODULE #1 0 5 35 4 34 64 94 124 154 184 255 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE MODULE #2 0 5 35 4 34 64 94 124 154 184 214 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE MODULE #3 0 5 35 4 34 64 94 124 154 184 214 No function RED GREEN BLUE YELLOW PURPLE CYAN PINK-WHITE NO FUNCTION NO FUNCTION STROBE
FUNCTION
1
65 95 125 155 185
2
65 95 125 155 185
3
65 95 125 155 185
4 5 6
0 5 4 255
No function Strobe (slow to fast) MODE SELECTION
7
0 245
244 255
DMX MODE 1 DMX MODE 2
4 USING A DMX512 CONTROLLER
21
2008. 8. 13
CHANNEL
VALUE
0 10 20 9 19 29
FUNCTION
ID ADDRESS SELECTION (also see pg. 26) Select all ID addresses ID address #1 ID address #2 ID address #3
30 . 255
209
ID address #20 ID address #21 ID address #22 ID address #23
ID address #66 NO FUNCTION NO FUNCTION
9 10
PIXEL
CHANNEL 1~9 1 2 3 4 5 6 7 8 9 VALUE
0 5 5 5 5 5 5 5 5 5 4 255 255 255 255 255 255 255 255 255
FUNCTION
NO FUNCTION BLOCK1-RED BLOCK1-GREE N BLOCK1-BLUE BLOCK2-RED BLOCK2-GREEN BLOCK2-BLUE BLOCK3-RED BLOCK3-GREEN BLOCK3-BLUE
4 USING A DMX512 CONTROLLER
22
2008. 8. 13
4. 3
BASIC INSTRUCTIONS FOR DMX512 OPERATION
STAGE 1 DMX MODE 1
RED, GREEN & BLUE COLOR SELECTION
CH1, CH2 & CH3 control the intensity ratio of each of the RED, GREEN & BLUE LEDs. When the slider is at the highest position (255) the intensity of the color is the maximum. CH1, CH2 & CH3 can be combined together to create over 16 million colors. CH1, CH2, CH3 have priority over CH4, CH5, CH6 & CH7
YELLOW, CYAN, PURPLE & WHITE
CH4, CH5, CH6 & CH7 are independent colors and cannot be mixed with any other color control channel. When multiple channels are used at the same time;lower channel number is priority (i. e. CH4 has priority over all channels 1-6)
STROBE
CH8 is the strobe channel and controls the strobe effects of CH1, CH2, CH3, Ch4, CH5, CH6, & CH7 The strobe is with an adjustable speed with a maximum of 20Hz. The strobe is not active with CH9 & CH12
MODE SELECTION
CH9 allows the user to activate DMX MODE 1 (0-244) or DMX MODE 2 (245-255).
CH9 values 5-244 can only be activated when CH1 to CH7 are not activated
When Color-Cycle Mode 4 is selected CH11 controls the speed of the Color-cycle.
ID ADDRESS SELECTION
CH10 is used to select the target ID address. [. . . ] 2) to select DMX mode 2 to select all ID Addresses to select OFF for MODULE #1 (ID Add. 2) to select OFF for MODULE #3 (ID Add. 1) to select DMX mode 2 to select ID Add: 2 to select RED for MODULE #1 (ID Add. 2) to select DMX mode 2 to select ID Add: 2
ID Addr. 1 ID Addr. 2 ID Addr. 1 ID Addr. 2 ID Addr. 1 ID Addr. 2 ID Addr. 1 ID Addr. 2
Step 1
CH3 CH9 CH10 CH1 CH2
Step 2
CH3 CH9 CH10 CH1 CH2
ID Addr. 1
ID Addr. 2
Step 3
CH3 CH9 CH20 CH1 CH2
ID Addr. 1
ID Addr. 2
Step 4
CH3 CH9 CH10 CH1 CH2
Step 5
CH3 CH9 CH10 CH1 CH2
Step 6
CH3 CH9 CH10
Red
Green
Blue
4 USING A DMX512 CONTROLLER
27
2008. 8. 13
CH1 CH2
0 0 0 0 11 255 0 0 0 12
to set OFF for MODULE #1 (ID Add. 1) to select OFF for MODULE 2 (ID Add. 1) to select OFF for MODULE 3 (ID Add. 1) to select DMX mode 1 to select ID Add. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC LED BLASTER 108
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC LED BLASTER 108 will begin.