User manual BEBECONFORT WINDOO PLUS

[. . . ] It is strongly recommended that you keep your  infant secured by using the fastening system of your carrycot, whether you are using it as a carriage, a pram or a portable seat. Regularly air the inside of your carry cot in order  to maintain its hygiene. Do not use the rain cover in sunny weather  because of excessive heat. [. . . ]  ven minor shocks which happen as a result of E a collision with another vehicle can transform your baby into a real projectile.  he user must always ensure that luggage or T items that are likely to cause injury to the occupant of the carrier in the event of a collision must be securely stowed away.  lways check that no part of the safety kit or A harness is trapped under a seat or in the door of the vehicule.  ever place heavy objects on the rear parcel shelf N to avoid them being thrown during an accident.  ever make any modifications to the construction N or materials of the car safety kit and the belt.  se of the car safety kit is obligatory to provide U the car cot function of the carrycot.  his car safety kit may only be used with the T carrier for which it is intended.  or optimum safety of your baby in the event of F lateral impact in a car cot, it is important not to position the child’s head on the door side.  he carrier may only be fitted on the back seat of T cars which are fitted with 2 or 3 point safety belts, whether they are the inertia reel type or not, which comply with regulation no.  he carrycot is fitted to the rear seat of the T vehicle at a right angle to the road, and solidly fixed to the seat. Should not be replaced with any other than the one recommended by the manufacturer as the cover constitutes an integral part of the restraints performance.  he temperature inside a car can get very high, T especially after lengthy exposure to the sun. In these conditions it is strongly recommended to cover the car safety kit with cloth or other material which will prevent the harness fitting/fixings, and other metal components, becoming too hot and burning your child.  he rigid elements and plastic parts of a child car T seat must be fitted and positioned in such a way that, under the conditions of normal vehicle use, they cannot become trapped under a mobile seat or in the door of the vehicle. This child car seat is only effective when used in accordance with the manufacturer’s instructions. Maintenance EN After dismantling (make sure you have well noted how the various pieces are assembled on the seat in order to assemble them back properly). - For washing the garment, please consult the  instructions on the label. environment Keep plastic covering away from children to avoid suffocation. [. . . ] €  hen repairs have been carried out by a third W party or a non-approved retailer. €  hen the defect was caused by incorrect or W insufficient use or maintenance, neglect or impacts at the level of the textile and/or chassis. €  hen it is a case of normal wear of the parts, W such as can be expected from daily use (wheels, rotating and moving parts, etc. [. . . ]