User manual BEABA UPDOWN
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEABA UPDOWN. We hope that this BEABA UPDOWN user guide will be useful to you.
 |
Manual abstract: user guide BEABA UPDOWN
Detailed instructions for use are in the User's Guide.
[. . . ] KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
WARNING
⢠Never leave a child unattended. ¢ This bouncer is not intended for long periods of sleep. ⢠This bouncer does not replace a Moses basket or a cot. [. . . ] ¢ Always dry the productâs metal parts in order to prevent the formation of rust. ¢ Protect the product from atmospheric agents (rain, snow, etc. In order to avoid assembling the product incorrectly, always ensure that the polarising slots are aligned correctly. Always ensure that the knuckle is placed in the same direction as the tube and that the nut hole on the knuckle is facing towards the inside of the bouncer. Fasten the knuckles (C) and the small tubes (B) to the frame with the screws (D). 3
5
Position the large tubes (A) by pressing on the spring buttons and inserting them in the small tubes (B). The three holes on the large tube must be facing towards the inside of the bouncer. Press on the locking buttons on each side of the seat structure and release at the desired position. 4
6
Remove the handles (E) by pressing on the spring button and unfold the seat structure (G) following the instructions for setting the incline. Always ensure that the seat structure is facing the right way (seat on the same side as the stabiliser). Position the handles (E) by pressing down on the spring buttons and inserting them in the large tubes (A). To do this, fold the seat structure, place over the back and then over the seat. ASSEMBLY INSTRUCTIONS FOR LOW POSITION
INSTRUCTIONS FOR SETTING THE INCLINE AND FOLDING
To use your bouncer in the low position, follow the assembly instructions above without inserting the large tubes (A). To set the incline of the bouncer seat, place your hand on the top of the seat back and press the button at the rear. [. . . ] Pass the two straps on the harness through the two openings on the newborn pillow. To install the child in the bouncer, unlock the 4 fastening points on the restraint system. Place the child in the centre of the seat ensuring that the crotch strap is in place. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEABA UPDOWN
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEABA UPDOWN will begin.