User manual BAUKNECHT WTW7800XW

[. . . ] Washer with low-water washplate wash system The most striking difference in your new washer is the low-water washplate wash system. The washer automatically adjusts the water level to the load size--no water level selector is needed. As the washer dampens and moves the load, the level of the clothes will settle in the basket. This is normal, and does not indicate that more clothes should be added. [. . . ] IMPORTANT: When delaying a cycle, use liquid HE detergent only in the dispenser. Powdered detergents may absorb moisture from a previous cycle and clump before the wash cycle begins. NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments. Warm Some cold water will be added, so this may be cooler than what your previous washer provided. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Dark colors that bleed or fade Light soils Cold water temperatures are used to maintain colors and prevent dyes from transferring. Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found. When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker. Select any other cycle options you may wish to add, if not previously set. some cycles will automatically add certain options such as Deep Clean or Extra Rinse. To keep washer interior odor-free, follow this recommended monthly cleaning procedure: 1. OR If using liquid chlorine bleach, add 1 cup (250 mL) to liquid chlorine bleach dispenser. When the cycle has finished, the DONE indicator will light and the end of cycle signal will sound (if set). Promptly remove garments when cycle is done to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. To reinstall washer after non-use, vacation, winter storage or moving: 1. Before using again, run washer through the following recommended procedure: To use washer again: 1. Run washer through BULKY ITEMS cycle to clean washer and remove antifreeze, if used. Front and rear feet must be in firm contact with floor, and washer must be level to operate properly. If flooring is uneven, a 3/4" (19 mm) piece of plywood under your washer will reduce sound. Or washer stopped with all dial lights flashing Load dry items in loose heaps evenly around basket wall. Adding wet items to washer or adding more water to basket could unbalance washer. [. . . ] The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with Whirlpool's published installation instructions. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or cannot be easily determined. dISCLAIMER OF IMPLIED WARRANTIES IMPLIED WARRANTIES , INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE , ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. [. . . ]