User manual BAUKNECHT WED97HEXL DIMENSION GUIDE

[. . . ] Electric Dryer Installation Instructions PRODUCT MODEL NUMBERS WED94HEX, WED95HEX, WED97HEX, WEDXXHEX Front view: 27" (686 mm) OVERALL DIMENSIONS Dryer dimensions Side view: 507/8" (1292 mm) 311/8" (790 mm) Electrical: This dryer requires a 3 or 4 wire, single phase, 120/240 volt, 60 Hz. , AC only electrical supply (or 3 or 4 wire, 120/208 volt electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. [. . . ] Angled hood (acceptable) 143/8" (365 mm) 61/8"* (156 mm) NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer for exhaust vent with elbow. See "Venting Requirements. " The Vent system chart provides venting requirements that will help achieve best drying performance. NOTE: Side and bottom exhaust installation have a 90° turn inside the dryer. To determine maximum exhaust length, add a 90° turn to the total number of elbows when referemcing the chart. Closet installation (dryer only): Vent system chart Number of 90° elbows Type of vent Rigid metal Rigid metal Rigid metal Rigid metal Rigid metal Box/louvered hoods 64 ft. (864 mm) 3" (76 mm) 48 in. 2 (310 cm2) 0 1 2 3 4 3" (76 mm) 1" (25 mm) 24 in. 2 (155 cm2) For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 1" (25 mm) Do not use vent runs longer than specified in vent length chart. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]