User manual BAUKNECHT WED95HEX DIMENSIONS

[. . . ] Electric Dryer Installation Instructions PRODUCT MODEL NUMBERS WED94HEX, WED95HEX, WED97HEX, WEDXXHEX Electrical: This dryer requires a 3 or 4 wire, single phase, 120/240 volt, 60 Hz. , AC only electrical supply (or 3 or 4 wire, 120/208 volt electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. [. . . ] See "Venting Requirements. " 3/4"* (18 mm) OVERALL DIMENSIONS Dryer dimensions Front view: 27" (686 mm) Side view: 507/8" (1292 mm) 305/8" (728 mm) 381/8" (968 mm) Left or right side exhaust 3 /4"* (18 mm) Back view: 61/2" (165 mm) 297/8"* (759 mm) 31/2"* (89 mm) A B A. Angled hood (acceptable) C 61/8"* (156 mm) (365 mm) 143/8" 3 /4"* (18 mm) * Approximate measurement The Vent system chart provides venting requirements that will help achieve best drying performance. NOTE: Side and bottom exhaust installation have a 90° turn inside the dryer. To determine maximum exhaust length, add a 90° turn to the total number of elbows when referemcing the chart. Closet installation (dryer only): Vent system chart Number of 90° elbows Type of vent Rigid metal Rigid metal Rigid metal Rigid metal Rigid metal Box/louvered hoods 64 ft. (155 cm2) 2 For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 1" (25 mm) Do not use vent runs longer than specified in vent length chart. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]