User manual BAUKNECHT GSIP 6130/1 A+ IN

[. . . ] Store the detergent, rinse aid and salt in a dry place out of the reach of children. The open dishwasher door can only support the weight of the loaded rack when pulled out. Do not rest objects on the open door or sit or stand on it: the appliance may topple over!Only use detergents, rinse aids and regeneration salts specially recommended for use in domestic dishwashers. [. . . ] For Austria: if the apparatus is series connected to a fault current switch, this must be sensitive to the pulsating current. From a water hardness category of 1-2 (average), before using the dishwasher, fill the salt container with regeneration salt (to find out the hardness level of water in your area, contact your local Water Board or check the last bill you received). If the water hardness level does not correspond to position 3 on the selector (setting on delivery) or if the water hardness level changes: Turn the selector to the correct position. Set the water hardness by turning the selector (if fitted) inside the door (top left) using a screwdriver. Use the table below to set the dial to the correct setting: If the water hardness level falls within category 1 (soft), no salt is required. How to fill the salt container Warning: only use regeneration salts for use in domestic dishwashers!Do not fill the salt container with unsuitable substances, such as detergent, as this will cause irreparable damage to the water softener system. When first using the dishwasher: fill the salt container to the rim with water. Fill the salt container to the rim with salt (using the filler provided) (when filling for the first time use min. After filling the regeneration salt container, immediately start a wash program (the Prewash program alone is not sufficient), so as to eliminate any residual saline solution straight away. The dishwasher is equipped with an electric or visual salt level indicator (depending on the model installed). Electric indicator: The salt level indicator lamp on the control panel lights up when the salt container is empty. Visual indicator: The float is clearly visible in the cap window when the salt container is full. The float lowers and is no longer visible when the salt container is empty. The rinse aid facilitates drying and prevents the formation of unsightly spots and streaks on crockery. Before using the dishwasher for the first time, fill the rinse aid dispenser. How to fill the rinse aid dispenser: Only use rinse aids recommended for use in domestic dishwashers 1. Fill the dispenser with rinse aid up to the dashed line "max" (about 100 ml. This prevents the formation of excess suds which may spoil washing results. Thereafter, regularly check the rinse aid level How to adjust the rinse aid dosage regulator: factory setting: position 4. [. . . ] For programmes with additional "Half load" function selected (if provided): Use a smaller quantity of detergent. Before cleaning or carrying out maintenance, switch off the appliance and turn off the water tap. Cleaning the outside of the appliance: To clean the outside of the appliance, use a neutral detergent and a damp cloth. Cleaning the inside of the dishwasher: Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. [. . . ]