User manual BAUKNECHT BCTM 9100 PT

[. . . ] This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] If you wish to set a different cooking function, press and select the desired function. This function can be used to cook food for a set length of time, from a minimum of 1 minute to the Maximum time allowed by the selected function, after which the oven switches off automatically. To select the function, position the cursor next to "cooking duration" using buttons Press button to select the setting; "00:00" flashes on the display. Change the value using buttons and to display the desired cooking time. At the end of cooking, with certain functions, the display indicates the possibility of browning. Cooking finished at 20:00 ^ to prolong, OK to brown At the end of cooking time, the display shows "^ to prolong, OK to brown". The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This setting is only possible when pre-heating is not required for the selected function. After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end of cooking time, and thus also the cooking start time, proceed as follows: Position the cursor next to the end of cooking time using buttons Press button to select the setting: the end of cooking time flashes. To delay the end of cooking time, use buttons and to set the desired value. The oven will start cooking after a period of time calculated so as to finish cooking at the set time (for example, in the case of a dish which requires a cooking time of 20 minutes, if the end of cooking time is set to 20:10, the oven will begin cooking at 19:50). : during the interval before cooking starts, the oven can in any case be switched on by pressing At any time during cooking, set values (temperature, grill setting, cooking time) can be changed If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the current temperature and the bar indicating cooling in progress. When the residual heat reaches 50°C, the display shows the current time. This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. With the oven off, press button : the display will show "00:00:00". When the set time has elapsed, the display will show "00:00:00" and an acoustic signal will sound. At this point the time can be prolonged, proceeding as described above, or the timer can be deactivated by pressing button (the time of day will be shown on the display). Thanks to "intelligent sensor technology", the oven offers 30 pre-set recipes with the ideal cooking function and temperature. Simply follow the recipe as regards ingredients and the method of preparation. Insert food on level 3 Press when done Select the dish to be cooked from the proposed list. Select the desired recipe using buttons Confirm by pressing : the display shows the approximate cooking time. [. . . ] To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the "FORCED AIR" function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Use dark coloured metal cake tins and always position them on the wire shelf supplied. [. . . ]