User manual BAUDTEC C802USB

[. . . ] ADSL USB Modem User Manual Content The Front Panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install the USB ADSL Modem under Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Install the USB ADSL Modem under Windows 2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Access Internet via " AccessRunner DSL " to Dial up. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Uninstall the USB ADSL Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Product Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2 The Front Panel LEDs LED POWER READY Color Meaning When this LED is lit, it indicates that Green the USB port is connected to the PC and power on. When lit, it indicates that the ADSL (Line) port is connected to the DSLAM and working properly. [. . . ] IMPORTANT: IF YOU HAVE A PSTN (NORMAL ANALOG TELEPHONE LINE) YOUR SETTINGS DISPLAYED SHOULD BE "OTE Annex A, PPPoE", VPI 8, VCI 35. IF YOU HAVE AN ISDN TELEPHONE YOUR SETTINGS DISPLAYED SHOULD BE "OTE Annex B, PPPoE", VPI 8, VCI 35. 11. The warning will be displayed several times in Windows 2000 or Windows XP . Please follow the instruction from pop-up window and plug in your ADSL USB Device. 13. Choose "No, not this time" and click "Next" 10 14. The computer will find new device, please click "Next ". 15. Choose "No, not this time" and click "Next" 17. Please click " Finish " to complete the installation. 13 Install the USB ADSL Modem under Windows 2000 Note: Do not connect your ADSL USB device to the PC prior to driver installation and follow further instructions. If it does not start, click on Start ­ Run and type in C:\autorun. exe (where C: is the drive letter of your CD-ROM drive. 3. Pressing the "Install USB driver" button will launch the installation of device driver. 6. If you want to configure the setting manually, please click " Advanced ". IMPORTANT: IF YOU HAVE A PSTN (NORMAL ANALOG TELEPHONE LINE) CHOOSE "OTE Annex A, PPPoE" IF YOU HAVE AN ISDN TELEPHONE LINE CHOOSE "OTE Annex B, PPPoE" 16 9. You can see the parameters that you selected in this window, click " Next " to continue. IMPORTANT: IF YOU HAVE A PSTN (NORMAL ANALOG TELEPHONE LINE) YOUR SETTINGS DISPLAYED SHOULD BE "OTE Annex A, PPPoE", VPI 8, VCI 35. [. . . ] When you have completed this procedure the NEXT time that you will double click on the icon "AccessRunner DSL" you will enter your personal username in the form of user@otenet. gr which you chose as stated above and your password. 19 Uninstall the USB ADSL Modem 1. When the pop-up window is disappeared, the DSL Device and DSL Wizard have been successfully uninstalled 20 USB ADSL Modem C802USB FULL RATE BROADBAND USB MODEM Product Features The model adopt with Conexant CX82320 solution Plug-and-play installation provides seamless integration for Windows 98/2000/ME/XP, WAN mode support PPP over ATM (RFC2364) PPP over Ethernet (RFC 2516) LAN mode support Bridged/routed Ethernet over ATM (RFC 2684/1483) Classical IP over ATM (RFC2225/1577) Discrete Multi-Tone ADSL ensures interoperability with service providers Full rate ADSL allows speed up to 8Mbps downstream and 1Mbps upstream Simple and intuitive graphical user interface and Software upgrades Support 12Mbps USB host V1. 1 Interface Benefits Excellent solution for Desktop and notebook users Ultra-quick plug and play installation Worldwide ADSL access network and ISP interoperability Rapid broad-scale deployment via configuration profiling Easy field upgrade with feature enhancements Connection picture 21 Hardware Features: Standard compliance G. DMT ANSI T1. 413 issue 2 and ITU-T G. 992. 1 Downstream : Up to 8 Mbps in step of 32 Kbps Upstream : Up to 1 Mbps in step of 32 Kbps G. LITE ITU-T G. 992. 2 Downstream : Up to 1. 5 Mbps in step of 32 Kbps Upstream : Up to 512 Kbps in step of 32 Kbps ADSL DMT Engine Echo cancellation ADSL Framing Forward Error Correction (FEC) encoding and decoding and interleaving ATM mode Constellation encoding/decoding Device Specifications Dimensions: approximately 98 x 66 x 27 (mm) Bus Interface Compliant with USB (Universal Serial Bus) Specification 1. 1 Power Requirements USB Bus Power Physical Layer Discrete Multi-Tone Asymmetric Digital Subscriber Line, compliant with ANSI T1. 413 Issue 2, ITU-T G. 992. 1 (G. DMT), ITU-T G. 992. 2 (G. LITE) Loop Length Reach to 18, 000 feet Protocol Support RFC 1483 (Ethernet over ATM) RFC 2364 (PPP over ATM) RFC 2516 (PPP over Ethernet) Cabling ADSL interface: standard telephone wiring USB interface: standard USB interface cable (included) Environment Operating temperature: 0ºC to 40ºC Operating humidity: 10% to 90% non-condensing Visual Indicators LED indicators Power status Ready (Turns on when Driver has been installed properly) Link (Turns on, when physical layer being connected) TX (Flash during Data transmission) RX (Flash during date receiving) 22 [. . . ]