User manual BARTSCHER A190043-138

[. . . ] 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 TV (rear view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Initial auto installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 3 Enter the same four-digit number as in step 2 to confirm. • “The system PIN has been changed successfully” displays. Individual setting — Clock View setting Clock setup You can adjust the time manually and change the clock display. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Clock setup”. 4 Press ;. NOTE • As a precautionary measure, make a note of your PIN and keep it in a safe place that children cannot reach. • To view a locked channel, you must enter the PIN (see pages 36 and 37 for locking channels from viewing in DTV, SAT and ATV mode). Press 6 to display the PIN input window. View setting Time adjustment This function allows you to set the clock manually. NOTE • If you select “No”, the TV will try to get the time for the broadcast. Time display This function allows you to display the clock time in the lower-right corner of the screen. On On (half-hourly) Off Item Displays the clock time. Hides the clock time. NOTE • You cannot select “Off” in the “Quick start” menu while time shift is activated. Follow the on-screen instructions to change the “Quick start” settings. • If you want to clear the playable data, go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Clear the Time shift memory” (Page 47). Parental rating This function allows DTV services to be restricted. It prevents children from watching violent or sexual scenes that may be harmful. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Parental rating”. 2 Repeat steps 1 to 4 to the left under When selecting “Yes”. Time format You can select the time format (either “24HR” or “AM/PM”) for the clock time. Individual setting — PIN View setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”. NOTE • “Universal viewing” and “Parental approval pref. ” are ratings used exclusively in France. • The menu lists the “Wide mode” options selectable for the type of video signal currently received. • As you toggle the options, each is immediately reflected on the screen. There is no need to press ;. 2 Press a/b to select the desired item. WSS signal 4:3 screen 4:3 mode 4:3 mode “Normal” “Full” Basically, if you set “WSS” to “On” in the “Option” menu, the optimum “Wide mode” is automatically chosen for every broadcast or programme played using a VCR or DVD player/ recorder. NOTE • Some items do not appear depending on the type of received signal. • Refer to page 52 for PC signal inputs. 40 Useful viewing functions Terminal setting Option Input source settings Option NOTE Audio select When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from the “INPUT” menu Item When connecting devices (including a PC) with a HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with a DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (L/R) jack. Input select For setting the signal type of external equipment. • The label can be six characters or less. • This menu can be changed in the case of the following input sources: − EXT1–3 − HDMI1–4 − PC CH list 1 Press b to select the input source for setting 2 the input signal (“EXT1”) from the “INPUT” menu, and then press ;. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”. Item Y/C, CVBS, RGB INPUT TV Switchable HDMI EXT1 NOTE HDMI + Analogue • If no (colour) image displays, try changing to another signal type. • Check the operation manual of the external equipment for the signal type. Option Selecting the HDMI picture size automatically Option HDMI auto view This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals. 1 Press b to select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;. [. . . ] 2 For further information about the Energy Save function, please see related pages in this operation manual Measured according to EN 62301 Ed. 1 Standby power consumption applies when the TV is set to not receive EPG data Annual energy consumption is calculated according to EU Regulation (EU) No 1062/2010 based on operating 4 hours per day for 365 days a year CABINET TV 18. 3 Min 80 600 MOUNTING HOLES 12 DEPTH OF MOUNTING HOLES NOTE • The power consumption of on-mode varies depending on the images the TV displays. Mounting the TV on a wall The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. We recommend you to contact qualified service peronnel when installing it. [. . . ]