User manual BARTSCHER A165112

[. . . ] 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 TV (rear view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Initial auto installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • This function is available for 3D images converted from 2D images or normal 2D images. Selecting the WSS picture size manually Option Selecting the picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Full”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal range keeping 4:3 or 16:9 aspect ratio. Wide image without side bars. Wide mode You can select the picture size. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view” > “Wide mode”. • You can also select an item by pressing f on the remote control unit. • The menu lists the “Wide mode” options selectable for the type of video signal currently received. • As you toggle the options, each is immediately reflected on the screen. There is no need to press ;. Normal Full 2 Press a/b to select the desired item. WSS signal 4:3 screen 4:3 mode 4:3 mode “Normal” “Full” Basically, if you set “WSS” to “On” in the “Option” menu, the optimum “Wide mode” is automatically chosen for every broadcast or programme played using a VCR or DVD player/ recorder. NOTE • Some items do not appear depending on the type of received signal. 40 Useful viewing functions Terminal setting Option Input source settings Option NOTE Audio select When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from the “INPUT” menu Item When connecting devices (including a PC) with a HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with a DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (L/R) jack. Input select For setting the signal type of external equipment. • The label can be six characters or less. Audio output from headphones and speakers. • The factory preset value is “Auto”. • If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e. g. , “PAL”, “SECAM”). H-Pos. V-Pos. Screen effect settings Option Channel selecting effect This function shows a screen effect when choosing or changing channels. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. NOTE • Adjustments are stored separately for each input source. • Depending on the input signal type, “Wide mode” setting or “Video mode” for the USB media mode, a position setting may not be available. • This function is not available for DTV broadcasts with MHP signals. • This function is available for 3D images converted from 2D images or normal 2D images. 42 Useful viewing functions Additional features Option Option Key lock This function allows you to lock the buttons on the TV or remote control unit in order to prohibit children from changing the channel or volume. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Key lock”. Off RC control lock Button control lock Item Unlocks the buttons. Locks the buttons on the TV except the power switch. Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”. Off Standby Watch Always Item The LED is not illuminated. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. I J K Analogue Digital VHF/UHF CATV Satellite TV-tuning system Stereo/Bilingual Audio amplifier Speaker Terminals Antenna VHF/UHF Satellite RS-232C EXT 1 EXT 2 EXT 3 PC HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB 1 USB 2 (HDD) USB 3 (WIRELESS LAN) ETHERNET (10/100) HDMI 2/PC AUDIO (L/R) 72 Appendix Specifications (Wireless LAN USB adapter) Product name Standard Host interface Frequency band Security Modulation Dual Band 802. 11n USB2. 0 adapter IEEE 802. 11a/b/g/n USB2. 0 2412_2484 MHz 5150_5850 MHz Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) DBPSK@1 Mbps DQPSK@2 Mbps CCK@5. 5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps 11b 17 e/_ 1. 5 dBm 11g 14 e/_ 1. 5 dBm 11n 13 e/_ 1. 5 dBm 11a 14 e/_ 1. 5 dBm 11n 13 e/_ 1. 5 dBm 11a 13 e/_ 1. 5 dBm 11n 13 e/_ 1. 5 dBm _84 dBm@11 Mbps _72 dBm@54 Mbps _64 dBm@64-QAM, 20 MHz channel spacing _61 dBm@64-QAM, 40 MHz channel spacing Tx: 2. 2 W (Typical) Rx: 1. 4 W (Typical) 13 g 20. 0 (W) g73. 3 (D) g 8. 0 (H) mm 0 °C to e 40 °C NOTE Transmit Tx 2. 4 GHz power and output sensitivity power: (Typical) 5 GHz (5150_5250 MHz, 5250_5350 MHz) 5 GHz (5470_5725 MHz, 5725_5850 MHz) Rx sensitivity: (Typical) • This TV has received the following certifications when connected in an environment using the supplied BARTSCHER wireless LAN adapter. _ Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance®) _ Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance®) • When there is significant interference in the 2. 4_GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2. 4_GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports IEEE802. 11a/n (5 GHz) and set the access point to transmit at 5 GHz. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. [. . . ]