User manual BARTSCHER A165110
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BARTSCHER A165110. We hope that this BARTSCHER A165110 user guide will be useful to you.
Manual abstract: user guide BARTSCHER A165110
Detailed instructions for use are in the User's Guide.
[. . . ] 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 TV (rear view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Initial auto installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 40
Useful viewing functions
Terminal setting
Option
Input source settings
Option
NOTE
Audio select
When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from the “INPUT” menu
Item When connecting devices (including a PC) with a HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with a DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (L/R) jack.
Input select
For setting the signal type of external equipment.
• The label can be six characters or less. • This menu can be changed in the case of the following input sources: − EXT1–3 − HDMI1–4 − PC
CH list
1 Press b to select the input source for setting 2
the input signal (“EXT1”) from the “INPUT” menu, and then press ;. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.
Item Y/C, CVBS, RGB
INPUT TV
Switchable
EXT1
HDMI
NOTE
HDMI + Analogue
• If no (colour) image displays, try changing to another signal type. • Check the operation manual of the external equipment for the signal type.
Option
Selecting the HDMI picture size automatically
Option
HDMI auto view
This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals. 1 Press b to select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.
When selecting “PC” from the “INPUT” menu
Item When connecting devices with an AV cable to the PC terminal, displays images without audio. When connecting a PC to the PC terminal, and inputting analogue audio signals from the AUDIO (L/R) jack.
Input label
You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ;. • This function is available for 3D images converted from 2D images or normal 2D images.
42
Useful viewing functions
Additional features
Option
Option
Key lock
This function allows you to lock the buttons on the TV or remote control unit in order to prohibit children from changing the channel or volume. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Key lock”.
Off RC control lock Button control lock Item Unlocks the buttons. Locks the buttons on the TV except the power switch.
Illumination
This function makes the LED on the front of TV illuminated in several ways. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”.
Off Standby Watch Always Item The LED is not illuminated. The LED is illuminated all the time.
NOTE
NOTE
• You cannot set both “RC control lock” and “Button control lock” at the same time.
• The factory default for this item is “Watch”. • The LED is illuminated in blue for 3D mode.
Option
E Cancelling the lock Press @ on the TV and set to “Off” to cancel the “RC control lock”. Press @ on the remote control unit and set to “Off” to cancel the “Button control lock”.
Game play time
This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Game play time”.
Item Under connecting a game console to the TV, the elapsed time is displayed in 30-minute increments after you start playing a game. Hides the time.
• Refer to page 19 for menu operation using @ on the TV.
On Off
NOTE
• This menu can be selected in the case of the following input sources: − EXT1–3 − HDMI1–4 − PC 43
Other useful features
Time shift +
You can enjoy DTV/SAT recording or playback by connecting a commercially available USB storage device to the TV.
USB storage device registration
It is necessary to first perform USB storage device registration for USB storage devices used for time shift. Directly connect only one USB storage device to the USB port while registering the USB storage device (when two or more USB storage devices are connected, USB storage device registration is not available).
• The screen prompt pops up. When the USB storage device is connected to the TV Register the USB storage device. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
72
Appendix
Specifications (Wireless LAN USB adapter)
Dual Band 802. 11n USB2. 0 adapter IEEE 802. 11a/b/g/n USB2. 0 2412_2484 MHz 5150_5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5. 5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit Tx 2. 4 GHz 11b 17 e/_ 1. 5 dBm power and output 11g 14 e/_ 1. 5 dBm sensitivity power: 11n 13 e/_ 1. 5 dBm (Typical) 5 GHz 11a 14 e/_ 1. 5 dBm (5150_5250 MHz, 11n 13 e/_ 1. 5 dBm 5250_5350 MHz) 5 GHz 11a 13 e/_ 1. 5 dBm (5470_5725 MHz, 11n 13 e/_ 1. 5 dBm 5725_5850 MHz) Rx sensitivity: (Typical) _84 dBm@11 Mbps _72 dBm@54 Mbps _64 dBm@64-QAM, 20 MHz channel spacing _61 dBm@64-QAM, 40 MHz channel spacing Current Consumption (DC 5V) Tx: 2. 2 W (Typical) Rx: 1. 4 W (Typical) Weight 13 g Dimensions 20. 0 (W) g 73. 3 (D) g 8. 0 (H) mm Operating temperature 0 °C to e 40 °C Product name Standard Host interface Frequency band
NOTE
• This TV has received the following certifications when connected in an environment using the supplied BARTSCHER wireless LAN adapter. _ Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance®) _ Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance®) • When there is significant interference in the 2. 4_GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2. 4_GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports IEEE802. 11a/n (5 GHz) and set the access point to transmit at 5 GHz. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BARTSCHER A165110
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BARTSCHER A165110 will begin.