User manual BARTSCHER 700201G

[. . . ] All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. If the delivery consists of a special model, the actual scope of delivery may differ from the descriptions and illustrations in this manual. This is also the case for special orders or when the device has been modified in line with new technology. [. . . ] Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. 1 Overview of parts Air suction Air outlet Grids Glass doors Air is sucked in and cold air is circulated inside the Refrigerated showcase. The sliding glass doors at the rear allow for comfortable removal and insertion of beverages and foodstuffs. The device must only be connected to a properly installed single socket with protective contact. Do not use the device if it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user, or lead to damage of the device or personal injury, and furthermore invalidate the warranty. Keep the cable away from operating range and do not dunk it into water. Avoid water splashes on the refrigerated showcase and do not expose the device to rain water, dripping water or any other kind of moisture. Before installation, the local power grid specification should be compared with that of the device (see type label). Place the device on top of an even and safe surface which supports the weight of the device. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. Do not place the device near the open fire sources, electric ovens, heating stoves or other heat sources, for example direct sunlight. Exposition to high temperatures may cause damage to the device surface or may negatively influence cooling power and energy consumption. In order to avoid failures of the compressor when assembling or transporting the refrigerated showcase, it should not be tilted over an angle of 45° at any time. [. . . ] Contact qualified professionals or your retailer for further inspection an repairs. The following phenomena are no failures: This may be heard at regular operation and results from the flowing coolant inside the device. the formation of condensed water on the outer glazing is normal at high air humidity. The compressor comes on for 45 minutes and then shuts down for 15 minutes The compressor comes on for 45 minutes and then shuts At the end of its service life the discarded device has to be disposed in accordance with the national regulations. [. . . ]