User manual BARTSCHER 610835

[. . . ] Microwave oven with convection cooking and grill from page 31 to 60 This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. [. . . ] Wide, flat containers are best suited to use in the microwave oven as compared to narrow and tall ones. To avoid food from baking onto the edge of dishes, you may cover the edges with thin strips of aluminum foil. The table below will help you in selecting the proper dishes: Usable in microwave ovens yes no yes yes yes no no no Usable for grilling yes no yes no no yes yes yes Dishes for cooking Tempered baking glass Glass not resistant to high temperature Tempered porcelain Plastic dishes suitable for use in microwave ovens Kitchen paper Metal tray / bowl Metal rack Aluminum foil & foil containers Convection yes no yes no no yes yes yes Combination* yes no yes no no no no no Prior to first use it is necessary to wash the device, so that remnants of packing materials do not impact the taste of food products. Wash the interior and exterior of the device with a soft, moist cloth and dry thoroughly. Leave the door open so that the cooking chamber can dry out thoroughly. The rotating ring, glass tray and grilling tray with moving handle should be washed regularly with a small amount of washing-up liquid or in a dishwasher. Place the rotating tray elements into the depression at the bottom of the cooking chamber. Place the rotating tray with the grooved side at the bottom, on the bottom of the cooking chamber, and turn until the plate locks into the tray drive . Prior to turning the microwave oven on, check that the rotating tray and rotating ring are properly installed. The cooking chamber must be clean; the rotating ring must be located in the depression; the rotating tray must be secured to the tray drive . Do not heat / cook food products placed directly on the rotating tray. In the event of heating / cooking larger quantities of food cut into pieces, ensure they are evenly distributed throughout the dish used for cooking and that they do not touch one another. Never activate the device without the rotating tray and a container for food products, nor without food products!Close the door to the device and check that the seals are clean, and that the door closes properly. Set the desired operating mode, power level and cooking time (see below), and turn the device on. If the device is set to a high power level, keep it under constant observation!In the event of strange noises, food products swelling, or liquids churning, reduce the power level!If this is not done, the device will automatically interrupt the setting process. If the settings are accepted, the device will confirm this with an audible signal. A double signal means the device has not accepted the settings entered. To reactivate the device, close the door and then press the button marked Start Stop/Reset to delete all commands If you wish to complete the cooking process, press for a second time the button marked You may remove food products from the microwave oven. Dishes used for cooking may be very hot, as heat is emitted from the food product. [. . . ] Remove any remnants of food and beverages from the interior of the device with a moist cloth. Avoid using sprays and other aggressive cleaning agents, as such chemicals may leave stains on the device and even damage its surface. To protect the parts located inside the device from damage, do not allow water to seep through the ventilation ducts into the interior of the device. To remove dirt, wash the door, door seals and attached elements with a moist cloth. [. . . ]