User manual BARTSCHER 400.123 PART LIST

[. . . ] The Ethernet and USB cables are not supplied with your machine and must be purchased separately. [. . . ] The actual tape/packing materials may differ somewhat from these illustrated. Keep the packing materials, they are necessary to transport the machine. Align the notch on the end of the toner cartridge with the tab (a) in the image drum, then lower the toner cartridge into the image drum. Press down to make sure it is seated correctly, then lock toner cartridge with colored lever. If you also wish to install the User's Guide pdf: 1 2 With the CD still in the CD-ROM drive, click [User Guides]. Loop the cable as shown and place the ferrite core supplied with the printer about 1 inch (25 mm) from the connector on the printer end. If you also wish to install the User's Guide pdf: 1 2 With the CD still in the CD-ROM drive, click [User Guides]. In order to reduce electromagnetic interference--"noise" that interferes with TVs or other appliances--you must install the included ferrite core on the network cable. [. . . ] In order to reduce electromagnetic interference--"noise" that interferes with TVs or other appliances--you must install the included ferrite core on the network cable. [. . . ]