User manual BARTSCHER 306053-086

[. . . ] It must only be used by adults and exclusively to refrigerate and freeze foodstuffs, following the instructions for use contained in this manual. Do not ever touch or handle the appliance with bare feet or with wet hands or feet. It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is installed between cabinets, make sure that the cord is not bent or dangerously pinched or compressed. [. . . ] to come up on the display; if it is the first time you turn the appliance on, then this is not necessary. Now you can choose the language using the ADJUST/ SELECT + (E) (scrolls forward in the list of languages available that appear in the form of scrolling text) and/or ADJUST/ SELECT - (F) (scrolls back in the list of languages available that appear in the form of scrolling text) buttons. Remember to cool hot food before storing otherwise the temperature inside the appliance will increase, causing the compressor to work harder and use more energy. Do not store liquids in unsealed containers since this will increase the humidity and lead to the formation of frost in the refrigerator. To use the cold cuts/cheese box, unhook it and remove it from the shelf. To optimise space according to your needs, the same can be moved laterally (Fig. If not in use, the bottle/can rack can be tipped up and away to make more room inside the refrigerator. B B B A A A - Blown air which is cooled when it comes into contact with the refrigeration panel B - Hotter air is drawn in When the fridge compartment is filled up after a heavy shopping spree, use the SUPER COOL "J" function (see the paragraph on "How to use the display") in order to reach optimum operating conditions quickly. Once the necessary time has elapsed, the function is disabled automatically. Remember to follow our instructions on the storage life of foods: If not stored correctly, even the freshest food will deteriorate quite quickly. Contrary to popular belief, cooked foods do not keep longer than fresh food. Thanks to the special ICE PARTY function, you will no longer have to deal with the problem of finding broken bottles placed to cool inside the freezer compartment (all liquids, upon freezing, expand and increase in volume). By enabling this function, the appliance itself will let you know, by sounding a buzzer and by means of a visual signal (a message on the display in the form of scrolling text), when it is the best time to remove the bottle from the compartment. To turn the buzzer off and cancel the message from the display, just press the REST ALARM (C) button. Do not forget to use the ergonomic bucket provided to store the bottle inside the freezer compartment; as well as accelerating the cooling process of the same, once it is time to serve it at the table, you can take it there easily thanks to the special handles and keep it cool at length at the table. WARNING: always keep the bucket provided for the bottle inside the freezer compartment (even when you don't have bottles to cool); only this way can the low temperature of the liquid be guaranteed in a short amount of time. Remember that for optimal operation, the bucket with the bottle inside it should be stored in the top part "J" of the freezer compartment when the ICE PARTY function has been enabled. GB 20 Ice trays This new concept of ice trays is an exclusive Merloni patent. The fact that they are situated on the inner door of the freezer compartment ensures greater ergonomics and cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). To remove the ice trays from their housings, push the tray upwards and then pull it out (fig. To put the tray back in place, insert the top part into the special housing and, once in a vertical position, just let it drop into place. Once the ice has formed, all you need to do is to knock the tray against a hard surface so that the ice cubes come away from their housing and come out of the same hole used to fill the tray with water. [. . . ] When replacing the light of the refrigerator compartment unplug the unit from the power supply and chang the used lamp with another one of not more than 15 W. For access ti lamp "A", remove the centre screw "B" at the back of the lamp cover, as indicated in fig. Do not use mechanical devices or other tools to speed up the defrosting process, unless they have been recommended by the manufacturer. How to Defrost the Refrigerator This appliance defrosts automatically and the water is channeled to the back toward the drain installed for this purpose (fig. [. . . ]