User manual BARTSCHER 190.161

[. . . ] All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. If the delivery consists of a special model, the actual scope of delivery may differ from the descriptions and illustrations in this manual. This is also the case for special orders or when the appliance has been modified in line with new technology. [. . . ] Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months), make sure you check the state of the packaging and the parts regularly. Display screen Time display: current day and time Programmable automatic ON/OFF timer Digital display and reservoir temperature control Electronically controlled reservoir temperature using PID technology Automatic reservoir filling Automatic water pump disconnection when water level reaches low levels Visual indicator displays when water level in reservoir is too low Automatic disconnection of heating device when water level is too low Self-cleaning brewing assemblies Choice of four different programs controlling coffee portions Visual indicator displays regeneration phase in water decalcifying device Choice of language (Spanish, English, German, French, Italian) The device must only be connected to a properly installed single socket with protective contact. Do not use the device if it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Keep away the cable from operating range and do not dunk it into water. Before installation the local power grid specification should be compared with that of the device (see type label). Installation and maintenance of the device must be performed only by qualified personnel!Place the device on a flat, secure surface which can support the device's weight and is not sensitive to temperature. Never place the device near a source of open flame, electric heater, or any other source of heat. After set-up, the machine should be adjusted using the adjustable legs to ensure even distribution of coffee to each cup. Each electrical plug circuit should be secured to a level of at least 16A. The device can only be plugged directly into a wall socket ­ do not use multiple-socket clusters or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Connect the decalcifier device to the water supply using the second hose. The device is equipped with an automatic regulator to keep the water reservoir filled. It is also equipped with a protective mechanism to prevent sudden stops in water flow: 1. Place the strainer in the left side of the brewing assembly, then turn to the right until it settles into place. Insert the filter basket and fill it with the desired amount of coffee. Place the full strainer in the brewing head until it settles into place (see fig. Put the coffee cup under the coffee spout and press the brewing button. [. . . ] Coffee comes out too slowly: Change grinding settings, as at present they are too fine. If any other problems occur with the functioning of the device, contact a Customer Service Centre. - To turn off a display warning, turn the device off via the main on/off switch (see (8) fig. At the end of its service life the discarded device has to be disposed in accordance with the national regulations. [. . . ]