User manual BARTSCHER 135001

[. . . ] The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. The instruction manual including any texts, drawings, images or other illustrations is copyright. [. . . ] This device may only be operated in technically proper and safe condition. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The unit is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the unit. Children should be observed to ensure that they are not playing with the unit. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Before the first use, the unit should be cleaned in order to remove possible remnants after the manufacturing process or remainders of the packaging (see 6. For safety reasons the unit can only work when the funnel for filling is placed on the casing and the container for crushed ice is properly placed (snapped) under the collection opening. Connect the device to the appropriate power source, and turn the ON/OFF switch to the "I" position. The ice crusher should operate empty for 2-3 minutes to check if there are any eventual defects (for example, a strange sound of operation or a defective rotary motion of the cutting blades). Ice made in the first cycle after cleaning should be removed for hygienic reasons and not used for drinks, because traces of cleaner could be left in the interior of the unit. Only ice cubes made in an ice dispenser should be given for crushing, and not ice cubes from the freezer! Fill the funnel situated on the top of the unit with prepared ice cubes and start the process for crushing ice. To avoid injury, you should never try to insert ice cubes under the blades using your hands or by other means. If a larger piece of ice is stuck in the unit and the blades do not reach it, you should turn the on / off switch to the "O" position and remove the cord from the outlet. Pour hot water through the funnel for filling until the embedded piece of ice melts and falls out. Re-insert the plug of the unit in the outlet, turn the on / off switch to the "I" position and continue the process of crushing, filling the funnel again with ice cubes. [. . . ] ), because there exists an increased risk of fire or explosion when using the unit the next time. After cleaning, you should use a soft, dry cloth for drying and polishing the surface. Make sure that the unit was properly cleaned, before placing it in a dry place for further use. If sediment builds up in the interior of the unit, it should be removed by using a solution of water with vinegar. [. . . ]