User manual BARTSCHER 131790

[. . . ] This is also the case for special orders or when the device has been modified in line with new technology. The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. [. . . ] This device may only be operated in technically proper and safe condition. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The drinks freezer is intended only for cooling of alcohol and deep-frozen products. The heat can damage the surface of the device, as well as have a negative effect on the cooling power and increase the consumption of energy. To avoid damage to the compressor, do not tilt the device to an angle greater than 45° during setup or transport. Be careful when touching the condenser and doors, as damage to them will negatively impact the working of the device. Place the device in such a manner that there is a minimum of 10 cm between it and other objects, including walls, in order to ensure proper air circulation. Do not place the device where humidity or temperature are high as the device may be damaged. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Prior to first use, wash the device with warm water and a delicate cleaning agent. Prior to first use or following defrosting, set the temperature to the , , MAX" position at least 2 hours prior to inserting products or drinks into the freezer. Energy usage and damage to the device are greatest when there are larger numbers of full bottles in the device, or when the doors are held open for longer periods of time. To reduce loss of cold, keep the doors open for the shortest time possible. [. . . ] Too little space between objects in refrigerator or too many items stored. Remember to keep proper distance between bottles, remove unneeded objects · Freezer is touching wall or other objects. The above described problem cases are given for orientation and as examples. Should these or similar problems occur, please turn off the machine immediately and don´t use it anymore. [. . . ]