User manual BARTSCHER 131770

[. . . ] The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. The instruction manual including any texts, drawings, images or other illustrations is copyright. [. . . ] This device may only be operated in technically proper and safe condition. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. The heat can damage the surface of the device, as well as have a negative effect on the cooling power and increase the consumption of energy. To avoid damage to the compressor, do not tilt the device to an angle greater than 45° during setup or transport. Be careful when touching the condenser and doors, as damage to them will negatively impact the working of the device. Do not place the device where humidity or temperature are high as the device may be damaged. If the unit is used outdoors, protect it from precipitation and frost, Do not drill any holes in the unit nor mount any objects on it. Set up the unit in such a manner that proper air circulation is ensured. The mini-refrigerator must be wellventilated to allow warm air to escape. Never block circulation of air nor keep the unit in an enclosed space without fresh air. Apart from the external ventilation described above, the mini-refrigerator also contains an additional internal ventilator. Power source Jack in unit Car or boat socket Jack in unit The unit must be connected to an alternating current source in the manner described above, otherwise there is a risk of electric shock. Is set to the , , 0" position, the unit is turned off ­ even if an AC or DC cable is inserted or the COLD/HOT toggle switch is set to COLD (cooling) or HOT (warming) If the Cold/Hot toggle switch is set to COLD (cooling), the green LED light will If the Cold/Hot toggle switch is set to COLD (cooling), the green LED light will Do not flip the function switch directly from one mode to another. [. . . ] O If the unit is to remain unused for a long period, dry it thoroughly. For this reason, the door should remain opened when the unit is not used for some time. A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. O In case of damage or malfunction, please contact your stockist or our customer service centre. [. . . ]