User manual BARTSCHER 120.325

[. . . ] All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. If the delivery consists of a special model, the actual scope of delivery may differ from the descriptions and illustrations in this manual. This is also the case for special orders or when the device has been modified in line with new technology. [. . . ] Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. Pressing lever Pressing bar Round inlet Safety cover bolt START/STOP button Safety close knob Adjustable legs Housing Outlet The device must only be connected to a properly installed single socket with protective contact. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Keep away the cable from operating range and do not dunk it into water. The element is equipped with 2 safety elements (microswitches): safety close with microswitch, which halts the device's operation when the cutting blade safety cover is open. Microswitch by round inlet, which turns the device off if the pressing lever is up. Ensure the safety instructions and warnings placed on the vegetable cutter are always kept in readable condition and never remove them. The device, working area and surface around the vegetable cutter must always be kept dry and free from dust, vegetable cuttings and foreign bodies, so as to avoid the risk of slipping on a wet floor or piece of vegetable. Before installation the local power grid specification should be compared with that of the device (see type label). [. . . ] With a cloth), then lift the blade up while grabbing under the blade and removing it. For work that requires the use of one cutting blade, mount only one rotating cutting blade on the plastic disc. For work that requires the use of two cutting blades, mount the blades in the following order: 1. After mounting the blades, ensure that the safety cover has been secured using the safety close! [. . . ]