User manual BARTSCHER 105930S-123

[. . . ] The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. The instruction manual including any texts, drawings, images or other illustrations is copyright. [. . . ] This device is designed in accordance with the presently applicable technological standards. However, the device can pose a danger if handled improperly and inappropriately. Knowing the contents of the instruction manual as well as avoiding mistakes and thus operating this device safely and in a fault-free manner is very essential to protect yourselves from the hazards. To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken. This device may only be operated in technically proper and safe condition. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The unit is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the unit. Children should be observed to ensure that they are not playing with the unit. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Before installation the local power grid specification should be compared with that of the device (see type label). Place the device on top of an even and safe surface which supports the weight of the device and is not heat sensitive. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. 30 cm distance from walls and other flammable or color-sensitive objects. Only connect the unit directly to the wall socket; do not use any extension cords or power strips. Place the unit so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Wash the unit prior to use with a moist, soft cloth and a mild cleaning agent. The heat plate is divided in the middle into 2 heat plates, allowing you to heat using only one plate. The plate's temperature (30° - 85° C) is regulated using the right and C left temperature dials. For food to be heated at the top and bottom, place it on a heat plate under a heat lamp. [. . . ] Wash the exterior and heat plates with a moist, soft cloth and mild cleaning agent. Use soft cloth only and make sure you never use any kind of abrasive agents or pads, which could scratch the surface. O After the cleaning procedure you should use a soft and dry cloth to wipe dry and polish the surface. O Make sure the device has been cleaned and dried properly for further usage. [. . . ]