User manual BARTSCHER 105780-103

[. . . ] The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. The instruction manual including any texts, drawings, images or other illustrations is copyright. [. . . ] This device may only be operated in technically proper and safe condition. If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The unit is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the unit. Children should be observed to ensure that they are not playing with the unit. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. This device has been designed and built for commercial use only and should be operated by qualified personnel only. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. Place the unit on a flat, stable floor space which can support the weight and is not sensitive to heat. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. Place the unit so that the ventilation ducts at the rear are not blocked in any way. Do not place the unit near walls or other objects made of flammable materials. The device is not a built-in device and should not be installed as such!Prior to use, clean the interior and exterior of the unit with a soft, moist cloth and mild cleaning agent. Pre-heat the oven prior to each use, to allow for even heat distribution. Baking trays with the items to be baked may now be placed inside the chamber. Ensure a minimum of 40 mm between the trays and products being baked, so that the proper circulation of air is possible. The ventilators will distribute the water onto the heaters, which created steam in the baking chamber. [. . . ] Never use any sort of harsh cleaning chemicals which may scratch the unit. A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. O In case of damage or malfunction, please contact your stockist or our customer service centre. O Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. [. . . ]