User manual BARTSCHER 104395

[. . . ] The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. The instruction manual including any texts, drawings, images or other illustrations is copyright. [. . . ] If the device is used commercially, the user is obliged to ensure that the said industrial safety measures concur with the state of the rules and regulations applicable at the time in question for the entire period of use of the device and to comply with the new specifications. Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. This device is intended for commercial use only and should be operated by qualified personnel in professional food service organizations. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The ventilated saladette is intended only for cooling, preparing and distributing salads, fruits, vegetables and cold meals. High temperatures may have a negative effect on cooling power and increase energy consumption. Keep a minimum distance of 5 cm from the rear, 10 cm at the sides and 30 cm from the ceiling or shelves. Only move the device by lifting it, to avoid damage to the adjustable legs and other equipment. If the device has been transported in an upright position, wait 2 hours prior to connecting the device (integrated condenser) to a power source. To regulate the device's height, turn the adjustable legs until the device is straight and level. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Clean the device after unpacking and again before connecting it to a power source (see 6. After turning the device on, the LED display will show the following symbols: The factory pre-set temperature will also be shown. During first use, allow the device to reach the desired temperature prior to placing any food products or beverages inside. Display and functions Primary temperature settings are established at the factory and correspond to a working temperature in the device of approx. [. . . ] To reduce cold loss, keep doors and covers open for as short a time as possible. To avoid unpleasant odours inside the ventilated saladette, it is recommended to observe the best-by date for food products in storage. In the event of a power failure, avoid opening doors if possible in order to avoid cold loss. After a power outage or after removing the plug from its socket, do not connect the device to a power source for at least 5 minutes. [. . . ]