User manual BARTSCHER 101542

[. . . ] This is also the case for special orders or when the device has been modified in line with new technology. The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to work with or using it. We reserve the right to make technical changes for purposes of developing and improving the useful properties. [. . . ] O The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. O Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. O Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. Mulled wine pot / preserving pot is meant only for heating up and keeping the heat of liquids suitable for drinking, such as e. Do not use the mulled wine pot / preserving pot for: cooking food; warming up or heating of inflammable, volatilizing, noxious or similar fluids or materials. Do not use the device for anything beyond or other than its intended use. The manufacturer and/or authorized parties do not accept any claims resulting from damage caused by using the device not according to its intended use. Please check the delivery upon completeness and transport damage immediately after receipt. After boiling, rinse the container with clean water and drain it again. Clean the glass cover thoroughly with warm water and a mild cleaning agent. Then rinse the cover with clean water and dry it thoroughly with the use of a soft cloth. It is important that there is always drinkable liquid in the container before engaging the device. You must not pour undrinkable liquids such as acids, bases or leys, oils, nitrates etc. â· Put the plug in the power socket (the red control light will go on). During operation it must be ensured that no liquids can spill over as this can cause short-circuits in the electronic control. â· Before starting the device, put the glass cover so as to avoid temperature loss in the container. During taking the lid off there is a danger of burn by the escaping steam and condensate!With the use of the temperature control it is possible to adjust the temperature gradually from approx. Set the temperature control at the desired temperature by turning it clockwise (the green control light of heating will go on). [. . . ] While doing that, use tongs for taking out jars or a cloth so as to avoid burning your hand Leave the water in the device to cool and then empty the pot. If the device happens to be empty when turned on, the overheating protection will be activated. Remove the plug from its socket and leave the device to cool for approx. O Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug! [. . . ]