User manual BANG & OLUFSEN BEOVISION 10

[. . . ] BeoVision 10 Guide WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the AC Mains, disconnect the mains plug from the wall socket. The disconnect device shall remain readily operable. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Set the TV to Option 1 and the audio system to Option 1. Option 2 Option 2 The audio system is set up in one room and the TV with or without additional speakers in another. Set the TV to Option 2 and the audio system to Option 2. Options For information about Option 4, 5 and 6, see pp. Not all Bang & Olufsen audio systems support integration with the TV. For more information, contact your Bang & Olufsen retailer. Installation and setting up 22 Connect and set up a BeoLink system Connect and set up a BeoLink system to see pictures and hear sound in link rooms. You can, for example, connect the living room TV to another video system or to a set of speakers in another room. Connect a link tuner To distribute video signals to link rooms, it is necessary to connect a non-Bang & Olufsen link 1 tuner to the link room TV. * Main room Link room Option 6* RF OUT MASTER LINK MASTER LINK AV2 Link tuner Useful hints 1 *Connected equipment If an audio system is already connected to the MASTER LINK socket and you wish to connect more equipment, the Master Link cable must be split in two and joined with the cable from the link room using a special junction box. HDMI signals cannot be distributed from a main room TV to the link room system. Your television in a link room 23 If you have a BeoLink system, operate all connected systems through the TV in a link room. Connect link room TV Follow the procedure described here when you connect your TV for use in a link room. Set Option for a link room TV For your entire system to function properly, it is essential that the TV in the link room is set to the correct Option before you connect it to the system in the main room. Select V. OPT and accept Select Option 1 6* and Hold Press Option pgm . . . Press Select zone in which TV is placed 1 *NOTE!If you have a Beo4 and you connect the TV for use in a link room where other link systems are already connected, such as speakers, you must set the TV to Option 5 instead. Installation and setting up 1 Connect the link room TV to the mains supply. 2 Use your remote control to program the link room TV to the correct Option. 5 Reconnect the link room TV to the mains supply. 24 Two televisions in the same room If you have two TVs in the same room and one remote control for both TVs, it is essential that the TVs are set to the correct Options for them to function properly. Select the correct Option If you place a second TV in a main room where you already have a Bang & Olufsen TV and commands from your remote control can be received by both TVs, you must change the Option of the secondary TV to prevent simultaneous activation of both TVs. Select V. OPT and accept Select Option 4 and Hold Press Option pgm . . . Press Select zone in which TV is placed* 1 Beo4 ­ operate TV in Option 4 Activate a source simply by pressing the relevant source button. However, if your TV is set to Option 4 and you are using a Beo4, follow the instructions to activate a source. If you wish to dedicate a remote control to your secondary TV, contact your Bang & Olufsen retailer. BeoVision 10 Option 4 LIST TV Select LINK Select source LIST LINK TV TV Useful hints LINK on Beo4 In order to display LINK on Beo4, you must first add it to the Beo4 list of functions. See your Beo4 guide for more information. 25 Beo5 ­ operate the TVs Normally, if you have a Beo5, you can activate a source simply by pressing the relevant source button. But if you have two TVs in the same room, you must remember first to select the zone of the TV you wish to use. BeoVision 10 Zone `A' . . . TV Select zone for the TV you Select source wish to use Zone `A' TV Zone `B' TV 1 *NOTE!For information about choice of zone, contact your Bang & Olufsen retailer. Installation and setting up BeoVision 10 Zone `B' 26 Set up your television Follow the guidelines for placement and connection described on this and the following pages. Placement options The TV can be placed on a motorised stand or mounted on a wall bracket. Due to the heavy weight of the TV, any moving or lifting of the TV should be performed by qualified personnel ­ using the proper equipment. Handling We recommend that you place the TV in the packaging while you fasten the hinges for the wall bracket or the bracket for the stand. Use these when moving the TV to avoid scratching the frame. Wall bracket and motorised stand Set the maximum angle the TV will turn on the stand. The wall bracket can manually be turned 45° left or right depending on your setup. Remember to leave enough space around the TV to allow it to turn and tilt freely. Important Ventilation To ensure proper ventilation, allow enough space around the screen. At overheating (flashing standby indicator and an on-screen warning), switch the TV to standby, not off, in order for the TV to cool down. You cannot operate the TV during this time. 27 Overview Locate the connection panel and other important items. [. . . ] Screen Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths may harm the optical coating due to their strong abrasive effect. Cabinet and controls Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a solution of water and mild detergent, such as washing-up liquid. [. . . ]