User manual BALAY 3HB560XP

[. . . ] 5 5 6 8 10 10 10 11 11 12 13 13 15 15 16 16 17 18 18 19 21 22 23 23 25 27 28 28 28 29 3 Table of contents Basic settings . 30 31 32 32 33 33 34 35 36 36 38 39 41 44 44 45 46 47 48 48 48 49 49 50 50 55 55 57 58 4 Safety information Read the instructions in this manual carefully. This instruction manual is for use with both stand-alone ovens and oven-hob combinations. Read the instruction manual supplied with the hobs of oven-hob combinations to find out how their hob controls work. Before installation Transport damage Check the appliance after removing it from its packaging. [. . . ] Press and hold the @ switch until the hot air cooking method " and 160 ºC are displayed. You can now begin programming again. Starting the memory You can start the saved settings at any time. 1. Briefly press the i switch and use the rotary selector to select the memory location. Press the @ switch. The memory setting starts. 28 Changing the settings The settings may be changed at any time. The next time the memory function is switched on the original setting will appear, unless the changes have been saved. Press down the @ button until the hot air cooking method " and 160 ºC are displayed. You can now begin programming again. Cancelling operation Childproof lock To ensure that children cannot switch on the oven accidentally or change a setting, the oven has a childproof lock. Activating the childproof lock Press and hold the @ switch until the @ symbol appears. Locking the oven door You can change the basic settings so that the oven door also locks. If the child lock is activated the oven door will lock when the temperature inside the oven reaches 50 ºC and when the oven is switched off. Even if the childproof lock is active, you can still switch off the oven with #, set the timer and turn off the acoustic signal. Following a power cut, the childproof lock is no longer active. Releasing the lock Notes 29 Basic settings This oven has different basic settings. Note For all basic settings and the corresponding change options, refer to the table. Only the basic settings that correspond to the features of your specific appliance are displayed. Basic setting okb Options Language for the text display = Spanish = Portuguese = Greek = Englishng = German = off = on = off = on = short (10 seconds) = medium (2 minutes) = long (5 minutes) = no = yes Select language = Spanish okc Clock display = on Clock Button tone = on Duration of signal = medium Telescopic shelf: = yes Door lock for childproof lock = off Cooling fan run on time = long If the oven is switched off Sets the current time Confirmation tone when a switch is pressed Audible signal after a time has elapsed Telescopic shelves are retrofitted okd oke okf okg okh Door locks when childproof lock = off is set = on Length of cooling fan run on time = short = medium = long = very long oki 30 Changing the basic settings Please read the basic settings table to find out what each setting is. Example in the figure: change the signal duration basic setting to long. 1. Press and hold the ± switch for approximately 4 seconds until [Select language] appears in the text display. The code for the first basic setting appears in the temperature display. 3. Change the basic setting by turning the rotary selector. You can now select further basic settings using the ± switch and change them using the rotary selector. 5. Press and hold the ± switch until the hot air cooking method " and 160 ºC are displayed. The changes are not applied. 31 Automatic switch off Your oven has an automatic switch off function. It is only activate if the settings have not been changed for a long time. [. . . ] Select the desired program using the control knob. A suggested weight for this programme appears in the clock display. 3. Press the A switch and set the weight of the food using the rotary selector. 55 4. The duration appears on the time display. The programme has ended A signal sounds. You can cancel the signal early by pressing the 0 switch. Suggestions for changing the settings: Changing the duration of the program Changing the program Cancelling the programme Changing the function end time Once the function has started the duration cannot be changed. [. . . ]