User manual BALAY 3HB557XP

[. . . ] 5 5 6 8 10 10 11 12 12 13 13 15 15 15 15 16 16 17 18 18 19 21 23 23 24 25 3 Table of contents Self cleaning . 25 26 26 27 28 29 29 31 31 32 34 37 37 38 39 39 40 40 40 41 4 Safety information Read the instructions in this manual carefully. This instruction manual is for use with both stand-alone ovens and oven-hob combinations. Read the instruction manual supplied with the hobs of oven-hob combinations to find out how their hob controls work. Before installation Transport damage Check the appliance after removing it from its packaging. [. . . ] The time requested is shown for a few seconds in the display. Changing the end time Cancelling the end time Calling up the time settings 22 Time After the appliance is connected or after a power cut, the 0 symbol lights up in the display with three zeros. Set the time with button @ or A. After a few seconds, the time set is adopted. Press the 0 button four times. The time symbols light up in the display, the N arrow is next to 0. 2. Change the time with button @ or A. After a few seconds, the time set is adopted. Please refer to the section on Changing the basic settings. Childproof lock The oven has a childproof lock to prevent children switching it on accidentally. The timer and clock can also be set when the childproof lock has been switched on. Switching on the childproof lock The function selector must be on the zero setting. Switching off the childproof lock Press button i for approximately four seconds. The childproof lock is switched off. 23 Modifying the basic settings The oven has different basic settings. These settings can be adapted to the user's personal requirements. Basic setting c0 Light intensity on displays c1 Signal duration when a cooking time or timer period has elapsed c2 Time display c3 Waiting time until a setting is adopted c6 Reset all values to the factory settings * Factory setting The oven must be switched off. The display panel shows the current basic setting for the light intensity of the indicators, e. g. Confirm with button 0. The next basic setting is shown in the display. You can use the 0 button to scroll through all levels and make changes using the @ or A button. 4. Note The basic settings will not be retained if the appliance is switched off at the mains or there is a power cut. The oven will be reset to the manufacturer's settings. 24 Automatic switch off If you do not change the settings on your appliance for several hours, automatic switch off is activated. The point at which this occurs depends on the temperature or grill setting that has been set. Overriding automatic switch off So that automatic switch off is not activated when it is not wanted, you can set a time period. The oven will heat until this period has expired. Self cleaning During self cleaning, the oven heats up to approx. Residues from roasting, grilling and baking are incinerated and you need only wipe the ash out of the cooking compartment. Level 1 2 3 Degree of cleaning gentle moderate intensive Duration approx. 2 hours The heavier and older the dirt, the higher the cleaning level should be. [. . . ] The Technical Assistance Service contact details are provided in the attached documentation. Product number and production number When contacting our Technical Assistance Service, please quote the appliance's product number (E) and production number (FD). The specifications label with the corresponding numbers can be found on the right-hand side of the oven door. To save you any inconvenience in the future, we recommend that you record the details for your appliance and the telephone number of the Technical Assistance Service in the boxes below. [. . . ]