User manual BABYMOOV TURBO VAPEUR

[. . . ] €¢ Never leave the appliance close to any source of heat such as radiators, sunny windows, etc. €¢ Always use the bottle warmer on a completely flat and dry surface. €¢ The bottles will be very hot when they come out of the warmer. €¢ Never move the appliance while it is working or if it contains hot water. [. . . ] €¢ The quantities given in the table are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. : the material and the thickness of the bottle and the presence of a removable base are elements that can affect the bottle’s temperature. €¢ ATTENTION: to eliminate the risk of burns, always check the temperature of the food before giving it to your baby. For a jar, mix the contents and try it in order to check it is not too hot. €¢ This appliance is not intended for use by persons (including children) with impaired physical, mental, or sensory abilities, or by persons lacking in experience or knowledge, unless the person responsible for their safety has supervised and instructed them in the use of this appliance. • Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with un-sorted household waste, but dispose of it at a selective collection point. €¢ This marking indicates that this product should not be disposed with other household wastes throughout the EU. Amount of water to be put in the measuring cup for BW for bottle content in room temperature 6 ml 8 ml 9 ml 9. 5 ml 10 ml 11 ml 12 ml 13 ml 14 ml 15 ml Amount of water to be put in the measuring cup for BW for baby jar in room temperature 10 ml 13 ml 18 ml Amount of water to be put in the measuring cup for BW for bottle content in fridge temperature 11 ml 12 ml 13 ml 14 ml 15 ml 15. 5 ml 17 ml 18 ml Amount of water to be put in the measuring cup for BW for baby jarin fridge temperature 16 ml 18 ml 25 ml Amount of milk in the bottle 60 ml 90 ml 120 ml 150 ml 180 ml 210 ml 240 ml 270 ml 300 ml 330 ml Jar 120 g 200 g 250 g 3. Hold the grille’s handle (g) to CLOSE the grill by turning it anti-clockwise. This will ensure that the steam goes through the steam “steam tongue” (d). It will go out automatically and an audible alarm will tell you that the cycle is complete. Hold the lid’s handle (a) and turn it clockwise to unlock the lid. For a bottle, add the milk powder, and place the teat and cap on the bottle. Shake it to ensure an even temperature and to mix the milk with the water. Always check the temperature of the food before giving it to your baby. - Place the Bottle Warmer on a flat and stable surface inside your car and vehicle. - Then carry out steps 1 to 17 described above, taking care to reduce the amount of water in the measure by a few millilitres (between 2 and 4ml), and replacing step 13 by the following instructions: 13. Connect the Car Adaptor Plug (h) on to the power cord of the bottle warmer. It will go out automatically and an audible alarm will tell you that the cycle is complete. [. . . ] - Repeat steps 1 – 13 as above, replacing step 10 by the following instructions : 10. Connect the Car Adaptor Plug (h) on to the power cord of the bottle warmer. It will go out automatically and an audible alarm will tell you that the cycle is complete. MAINTENANCE Cleaning - Never submerge the appliance in water, and don't fill it right up with water. [. . . ]