User manual BABYMOOV TULIPE ZEN

[. . . ] Do not throw electrical and electronic equipment away with un-sorted household waste, but dispose of it at a selective collection point. PLEASE COMPLY WITH THESE SAFETY INSTRUCTIONS • Never leave your child without supervision while the appliance is working. € Check that your electrical power supply voltage is compatible with the appliance (see the details indicated beneath the appliance). [. . . ] € In the interests of safety, only use Babymoov accessories and spare parts and never dismantle the appliance. € Avoid using your appliance if it is not working properly or if it is damaged. WARNINGS • The quantities given in the table are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. : the material and the thickness of the bottle and the presence of a detachable base are elements that can affect the bottle’s temperature. € ATTENTION: to elliminate the risk of burns, always check the temperature of the food before giving it to your baby. For a jar, mix the contents and try it in order to check it is not too hot. € If the power supply cable gets damaged it must be replaced by the manufacturer, the after-sales service or people with similar qualifications, in order to avoid any risk of danger. € This appliance is not intended for use by persons (including children) with impaired physical, mental, or sensory abilities, or by persons lacking in experience or knowledge, unless the person responsible for their safety has supervised and instructed them in the use of this appliance. € Chlidren should be supervised to ensure that they do not play with the appliance. HOW TO USE a - Graduated measure b - Tank c - Adaptor ring d - "On" switch e - Basket for jars f - Indicator lamp Points to respect for trouble-free use: - Always check that the bottle is slightly open. - Optimum heating will be guaranteed provided operation is not interrupted. NB: always use the large basket to heat bottles and jars 6 STEAM BABY BOTTLE WARMER • Instruction Manual By using the amounts of water indicated in the tables below, a baby bottle or jar will be heated to 30°/33°C. The quantities given are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water. Take care: the quantities of water given correspond to a polycarbonate bottle without a removable base. Fill the bottle warmer measure (a) with water up to the mark indicated. Put the jar in its basket (e) then put the basket in the bottle warmer tank (b). Remark: the appliance can't be stopped using the "On" button. It will turn off automatically to tell you that the bottle or jar is ready. [. . . ] In order for the sterilizer to work properly, the tank needs to be de-scaled regularly. Proceed as follows: Mix 100 ml hot water with 100 ml white vinegar and pour it all into the tank (b). IN CASE OF ANY LITTLE PROBLEMS The bottle warmer doesn't heat up: - check the "On" button to make sure it is properly switched on, - check that the appliance is properly plugged in, - check that there is not too much scale in the tank, and de-scale if necessary. [. . . ]