User manual BABYMOOV BABYPHONE EASY CAR NEW GENERATION

[. . . ] BABYPHONE EASY CARE • Notice d’utilisation 3 Baby monitor Easy Care EN INSTRUCTION MANUAL Thank you for choosing our Baby monitor Easy Care. We recommend you read these instructions carefully in order to use your Baby monitor to best advantage and ensure it continues to operate as long as possible. If you should find a fault, however, or if you have any problem, please contact our company. [. . . ] - Never go away from your baby outside the house, even a short moment. - Non-rechargeable batteries are not to be recharged ; - Rechargeable batteries are to be removed from the device before being charged ; - Different types of batteries : new and used batteries, or rechargeable and not rechargeable batteries, are not to be mixed ; - Rechargeable batteries are only to be charged under adult supervision ; - Batteries are to be inserted with the correct polarity (+/-) ; - Exhausted batteries are to be removed from the device ; - The supply terminals are not to be short-circuited. - For best performance of your babyphone, and to reduce any interference, we recommend you do not plug any other electrical appliance into the same socket as your babyphone. Operation using batteries (not supplied) Slide open the battery cover of transmitter and receiver. Insert four pieces AAA size (UM-4) alkaline batteries into the compartment. Operation using the (AC adapter supplied) The transmitter and the receiver can be operated on AC mains using the supplied 6V 300 mA adapter. Connect the output plug of adapter to DC jack of the transmitter (5) and the receiver (12). DC Jack OPERATION A / Transmitter • Switch the transmitter on by setting button 2 to VOX (tripped on voice, recommended) or to ON (continuous operation). €¢ Select either channel 1 or 2 using the Channel Selector Switch 3. €¢ Place the transmitter about 1 m from the cradle, directing the microphone (6) towards the baby. €¢ Under VOX mode, once the built-in microphone picks up any sound from the baby, the transmitter will automatically switches into transmit mode and the transmit indicator (1) lights up. When the baby stop making sound, the transmitter will return to standby mode and the transmit indicator goes off. €¢ Under ON (continuous transmission) mode, the transmitter will always transmit no matter the baby is making any sound or not. This is useful if you want to monitor the slightest sound of the baby. [. . . ] €¢ The condition of the batteries is shown by the indicator (7). NB : If you hear noises other than your baby's, change to another channel both for the transmitter and receiver. €¢ For more convenience, the receiver can be carried around using the belt clip. [. . . ]